JH162A Datasheet, PDF (22/25 Pages) List of Unclassifed Manufacturers – SPECIFICATIONS FOR LCD MODULE

JH162A SERIES
JEWEL HILL
No
Item
Criterion
15.1 No oxidation, contamination, curves or, bends on
interface Pin (OLB) of TCP.
15.2 No cracks on interface pin (OLB) of TCP.
15.3 No contamination, solder residue or solder balls on
product.
15.4 The IC on the TCP may not be damaged, circuits.
15.5 The uppermost edge of the protective strip on the
interface pin must be present or look if it cause the in
interface pin to sever.
15.6 The residual rosin or tin oil of soldering (component
or chip component ) is not burned into brown or
General
black color.
15 _{appearance 15.7 Sealant on top of the ITO circuit has not hardened.}
15.8 Pin type must match type in specification sheet.
15.9 LCD pin loose or missing pins.
15.10 Product packaging must the same as specified on
packaging specification sheet.
15.11 Product dimension and structure must conform to
product specification sheet.
15.12 The appearance of Heat Seal should not admit any
dirt and break.
AQL
2.5
1.0
2.5
2.5
2.5
2.5
2.5
1.0
1.0
1.0
1.0
19 / 22