|
W55P241 Datasheet, PDF (2/32 Pages) List of Unclassifed Manufacturers – I/O device usable with many different microprocessors through SPI interface | |||
|
◁ |
W55P241
1. GENERAL DESCRIPTION
The W55P241 is a general purpose programmable I/O device usable with many different
microprocessors through SPI interface. The W55P241 contains three 8-bit ports (BP0, BP1 and BP2).
There are 24 I/O pins which may be individually programmed for 4 separate command groups. The
W55P241 features logical operating capability AND/OR/XOR for each bit of internal configuration
register to speed up access. These I/O pins can drive LED directly with high-current applications. A
dedicated counter is in charge of 256-level output functions.
2. FEATURES
ï· Wide range of operating voltage:
ï 2.2~5.5V
ï· SPI interface in mode 0
ï 4 SPI pins for communication
ï /CS as chip select pin (low active)
ï CLK for data synchronization (up to 10MHz)
ï DI for W55P241 to receive commands and data
ï DO for the microcontroller to receive data
ï· 1 wakeup pin for the microcontroller
ï· 24 I/O pins
ï 24 bi-directional I/O pins with 25mA of sink current
ï Status of each pin independently controlled
o Input
ï§ Floating
ï§ Pull high
ï§ Pull low
ï§ Dynamic pull low
ï§ Dynamic pull high
o Output
ï§ CMOS high/low
ï§ Inverted CMOS high/low
ï§ Inverted open-drain NMOS output
ï§ Open-drain PMOS output
ï Any pin can be selected to wake up the chip
ï Logic AND/OR/XOR to execute high-speed operations for each of these I/O control
register bits
ï· Built-in 8 LED outputs with 256-level brightness control in the BP0 port
ï Internal ring oscillator @ 8MHz
ï 4 clock sources
o Clock/512, /256, /64, /16
-2-
|
▷ |