60132 Datasheet, PDF (2/9 Pages) List of Unclassifed Manufacturers – 60132 Circuit Breaker

Section 1—Introduction
Multi 9Â¥ System Catalog
Section 1—Introduction
Multi 9^TM Products for Equipment Applications
The Multi 9 modular system of miniature circuit breakers and supplementary protectors, accessories,
and peripherals provides complete protection of equipment or especially sensitive circuits within the
equipment. Installation labor and space are both minimized by the modular architecture of the Multi 9
system, whether a single protective device or multiple devices with their accessories are being used.
Schneider Electric offers an extensive line of UL 489 Circuit Breakers and UL 1077 Supplementary
Protectors. In addition, a variety of IEC certified Circuit Breakers and Accessories are available for
OEM's whose products are destined for export beyond North America. To an OEM, this means that
one family of electrical protection products can be used regardless of equipment destination.
The Standards include:
• UL 489 Standard for Circuit Breakers
• CSA C22.2 No. 5 Standard for Circuit Breakers
• UL 489A Standard for DC Communication Applications
• CSA C22.2 No. 235 Supplementary Protectors
• UL 1077 Standard for Supplementary Protectors
• CCC Pending 4Q2007
• UL 1053 Ground Fault Sensing and Relaying Equipment • C60 Miniature Circuit Breakers are RoHS Compliant
• IEC 60947-2 Low-voltage switchgear and controlgear - Part
2: Circuit-breakers
Potential applications include semi-conductor machines, communication equipment, process control
panels, computers, medical equipment, electronic controls, transformers, power supplies, and other
electrical equipment.
System Flexibility
The Multi 9 System includes an extensive line of field-installable accessories. Plug-on electrical auxiliaries
include shunt trip, undervoltage release, auxiliary switch, and alarm switch. Other protection devices include
residual current devices, dc circuit breakers, and switches. Control and display devices include signal
lamps, push buttons, and motor operators. There are also mechanical accessories for locking, operating,
shielding, mounting, etc. The following diagram shows many of the Multi 9 system accessories.
Figure 1: Functional Diagram of Multi 9 System
CI
Impulse
Counter
Status and Display Output
CH
Hour
Counter
V
Signal
Lamp
V
Signal
Lamp
BP
Push
Button
(N.O.)
or
Signal
Control Inputs
BP
Push
Button
(N.C.)
or
Signal
TM
Motor
Operator
Switch or
Control
Metering
Device
Protected Line
SD
Alarm
Switch
OF
Aux
Switch
MX + OF
Shunt
Trip
&
Aux
Switch
Plug-on Electrical Auxiliaries
MN
Under-
voltage
Release
C60
Circuit
Breaker
Vigi or GFP
Residual
Current Device
IH
and
IHP
Time
Switches
I
Switch
CM
Selector
Switch
DPN-N
Residual
Current
Circuit
Breaker
OFS
&
Elect.
Accessory
Other devices used with or instead of the C60 device
GFP
Ground
Fault
Protector
03/2008
7
© 2002–2008 Schneider Electric All Rights Reserved