D10650-40 Datasheet, PDF (19/20 Pages) List of Unclassifed Manufacturers – BGA THERMAL SOLUTIONS MATRIX

Integrated Circuit
Heat Sinks
HEAT SINKS FOR MICROPROCESSORS AND ASICs
569, 579, 589, 599 SERIES ^{Heat Sinks & Clip for Intel’s Pentium, Pentium MMX, AMD’s K6 & K62, CYRIX’s 6x86 & Media GX,}
Centaur/IDT’s WinChip C6
Fin
Thermal Resistance
Interface
Standard
Base Dimensions
Height
at 200 LFM
Material
P/N
in. (mm)
in. (mm)
(°C/W)
Options
569-100AK
2.34 (59.44) x 2.68 (67.95)
1.00 (25.4)
1.7
579-150AK
2.15 (54.71) x 1.95 (49.53)
1.50 (38.10)
1.6
589-150AK
2.15 (54.71) x 3.10 (78.74)
1.50 (38.10)
1.5
599X-100AB
1.96 (49.78) x 2.67 (67.95)
1.00 (25.4)
1.9
Material: Aluminum, Black Anodized
Pages 74–76
Pages 74–76
Pages 74–76
Pages 74–76
PRODUCT FEATURES
• Compact design heat sinks can comfortably fit a variety of Robust Socket 7-based PC boxes
• Robust clip attachments
• Clips are not captive to sink
• To order heat sink with optional interface material pre-applied at the factory,
add S4 or S5 suffix to the part number. (See Product Designation)
569-100AK SERIES
Dimensions: in.
MECHANICAL DIMENSIONS
2.34
1.00
.42
1.50
.23
1.50
2.68
OPTIONAL THERMAL INTERFACE
PAD (SEE PRODUCT DES.)
SPRING CLIP OPTION
(SEE PRODUCT DES.)
PRODUCT DESIGNATION
569 - 100 XX - XX
MODEL NUMBER
HEIGHT
100 = 1.00"
THERMAL INTERFACE
S4 = DELTALINK IV
BLANK = NO THERMAL PAD
CLIP
AK = SPRING CLIP
650/651 SERIES ^{Low-Cost Heat Sinks for DIPs and SRAMs}
14-16 Pin DIPs
Standard
P/N
650B
651B
Length
in. (mm)
0.250 (6.4)
0.750 (19.1)
Width
in. (mm)
0.740 (18.9)
0.415 (10.5)
These extruded heat sinks serve as low-cost heat dissipation solutions for DIPs
with pin counts from 14 to 16. Use an epoxy such as Wakefield Engineering
DeltaBond™ 152 or 155, or use Wakefield 2-part DeltaBond™ 156 modified
Height
in. (mm)
0.240 (6.1)
0.240 (6.1)
Typical
Applications
14-Pin, 16-Pin DIP
14-Pin, 16-Pin DIP
Weight
lbs. (grams)
0.003 (1.36)
0.005 (2.27)
acrylic adhesive. The 650 and 651 are also available in natural aluminum finish.
They can be ordered as 650P or 651P.
MECHANICAL DIMENSIONS
Notes:
1. Finish: black anodize
2. TIR: Total Indicator Read-
ing. This is a measure of
flatness across the greatest
dimension of a surface.
Dimensions: in. (mm)
650B
651B
NATURAL AND FORCED
CONVECTION CHARACTERISTICS
20