EAEDIP320B-8LW Datasheet, PDF (16/25 Pages) List of Unclassifed Manufacturers – CONTROL UNIT 320x240 WITH INTELLIGENCE

EA eDIP320-8
Page 16
Specifications may be changed without
prior notice. Printing error reserved
Command
Codes
Define touch key (key
remains depressed as long ^ESC A
as there is contact)
EA eDIP320-8: Commands for the touch panel
After
Remarks
reset
Touch: Define areas
'T': The area from xx1,yy1 to xx2,yy2 is defined as a key. 'U': Image no. n1 is
loaded to xx1,yy2 and defined as a key. 'down code':(1-255) Return/touch macro
T
xx1
yy1
xx2
yy2
dow up
code code
text
...
when key pressed. 'up code': (1-255) Return/touch macro when key released.
NUL _{(down/up code = 0 press/release not reported). ´text´: the first character}
determines the alignment of the text (C=centered, L=left justified, R=right justified).
this is followed by a string that is placed in the key with the current touch font.
U
xx1 yy1
n1
dow up
code code
text
...
NUL
multiline texts are separated with the character '|' ($7C, dec: 124); 'nul': ($00) =
end of string
Define touch switch (status
of the switch toggles after ^ESC A
each contact)
Define touch key with menu _{ESC A}
function
Define drawing area
Define free touch area
Set bar by touch
Touch frame form
Touch key response
Invert touch key
Query touch switch
Set touch switch
ESC A
ESC A
ESC A
Radio group for switches
Query radio group
ESC A
Delete touch area
Send bar value
automatically
Touch query on/off
Rotate touch query
Label font
Label zoom factor
Add. line spacing
Label angle
ESC A
'K': The area from xx1,yy1 to xx2,yy2 is defined as a switch. 'J': Image no. n1 is
K
xx1
yy1
xx2
yy2
dow up
code code
text
...
loaded to xx1,yy2 and defined as a switch. 'down code': (1-255) Return/touch
NUL _{macro when switched on. 'up code': (1-255) Return/touch macro when switched}
off. (down/up code = 0 on/off not reported). ´text´: the first character determines the
J
xx1 yy1
n1
dow up
code code
text
...
NUL
alignment of the text (C=centered, L=left justified, R=right justified). this is followed
by a string that is placed in the key with the current touch font. multiline texts are
separated with the character '|' ($7C, dec: 124); 'nul': ($00) = end of string
The area from xx1,yy1 to xx2,yy2 is defined as a menu key. 'down
code':(1-255) Return/touch macro when pressed. 'up Code':(1-255)
Return/touch macro when menu canceled 'mnu Code':(1-255) Return/menu
macro+(item no. 1) after selection of a menu item. (down/up code = 0:
activation/cancellation is not reported.) 'text':= string with the key text and the
M
xx1
yy1
xx2
yy2
dow up mnu
code code code
text
...
NUL
menu items. the first character determines the direction in which the menu
opens (R=right, L=left, O=up, U=down). The second character determines
the alignment of the touch key text (C=centered, L=left justified, R=right
justified). The menu items are separated by the character '|' ($7C,dec:124)
(e.g. "uckey|item1|item2|item3". The key text is written with the current touch
font and the menu items are written with the current menu font. The
background of the menu is saved automatically.
D
xx1 yy1 xx2 yy2
n1
A drawing area is defined. You can then draw with a line width of n1 within the corner coordinates
xx1,yy1 and xx2,yy2.
H xx1 yy1 xx2 yy2
A freely usable touch area is defined. Touch actions (down, up and drag) within the corner
coordinates xx1,yy1 and xx2,yy2 are sent.
B n1
The bar graph with the no. n1 is defined for input by touch panel.
Touch: settings
E n1
The frame type for the display of touch keys/switches is set with n1
1
I n1
Automatic inversion when touch key touched: n1=0=OFF; n1=1=ON;
1
S n1
Tone sounds briefly when a touch key is touched: n1=0=OFF; n1=1=ON
1
N Cod
The touch key with the assigned return code is inverted manually
X Cod
The status of the switch (off=0; on=1) is placed in the send buffer.
P Cod n1
The status of the switch is changed by means of a command (n1=0=off; n1=1=on).
R n1
G n1
Only 1 switch in a group is active at any one time; all the others are deactivated. nr=0: newly defined
switches do not belong
number nr. In the case
to
of
a
a
group. nr=1 to 255: newly
switch in a group, only the
defined switches belong to the group
down code is applicable. the up code
with
is
th₀e
ignored.
the down code of the activated switch from the radio group with the number n1 is placed in the send
buffer.
L Cod n1
The touch area with the return code (code=0: all touch areas) is removed from the touch query.
When n1=0, the area remains visible on the display; when n1=1, the area is deleted.
V xx1 yy1 n1
remove the Touch area that includes the coordinates xx1,yy1 from the touch query. n1=0: area
remains visible; n1=1: Delete area
Q n1
The Automatic transmission of a new bar graph value by touch input is deactivated
value is sent after setting (n1=1); each change is sent during setting (N1=2).
(n1=0);
a
new
1
A n1
O n1
F n1
Z n1 n2
Y n1
W n1
Touch query is deactivated (n1=0) or activated (n1=1);
n1=0: normal query; n1=1: Touch query for top view (solder straps changed over)
1
Touch: Label font
Set font with the number n1 (0 to 31) for touch key label
0
n1 = X zoom factor (1x to 8x); n2 = Y zoom factor (1x to 8x)
1,1
Insert n1 pixels (0 to 15) between two lines of text as additional line spacing
Text output angle: n1=0: 0°; n1=1: 90°; n1=2: 180°; n1=3: 270°
0