EAEDIP320B-8LW Datasheet, PDF (15/25 Pages) List of Unclassifed Manufacturers – CONTROL UNIT 320x240 WITH INTELLIGENCE

Specifications may be changed without
prior notice. Printing error reserved
EA eDIP320-8
Page 15
Command
Save display contents
Save area
Restore area
Copy area
Set menu font
Menu font zoom factor
Add. line spacing
Menu angle
Touch menu automation
Define and display menu
Next item
Previous item
End of menu/send
End of menu/macro
End of menu/cancel
Run normal macro
Run touch macro
Run menu macro
Disable macros
Enable macros
Select macro/image page
Save macro/image page
Restore macro/image page
Macro with delay
Autom. macros once only
Autom. macros cyclical
Autom. macros ping pong
Define macro process
Macro process interval
Stop macro processes
Wait (pause)
Set RS485 address
Tone on/off
Illumination on/off
Illumination brightness
Write output port
Send bytes
Send version
Send internal information
Power down
Codes
ESC C
ESC N
ESC N
ESC M
ESC M
ESC M
ESC X
ESC K
ESC Y
ESC S
ESC P
EA eDIP320-8: Command table 2
After
Remarks
reset
Clipboard commands (buffer for image areas)
B
The entire contents of the display are copied to the clipboard as an image area
S xx1 yy1 xx2 yy2
The image area from xx1,yy1 to xx2,yy2 is copied to the clipboard
R
The image area on the clipboard is copied back to the display
K xx1 yy1
The image area on the clipboard is copied to xx1,yy1 in the display
settings for menu box/touch menu
F n1
Set font with the number n1 (0 to 31) for menu display
0
Z n1 n2
n1 = X zoom factor (1x to 8x); n2 = Y zoom factor (1x to 8x)
1,1
Y n1
Insert n1 pixels (0 to 15) between two menu items as additional line spacing
W n1
Menu display angle: n1=0: 0°; n1=1: 90°; n1=2: 180°; n1=3: 270°
0
T n1
n1=1: Touch menu opens automatically; n1=0:Touch menu does not open automatically; instead, the
request 'ESC T 0' to open is sent to the host computer, which can then open the touch menu with 1
'ESC N T 2'.
Menu box commands (control with keys rather than by touch)
A menu is drawn as of the corner xx1,yy1 with the current menu font. no= currently inverted entry
D
xx1 yy1
no
text
...
NUL
(e.g.: 1 = 1. entry) Text:= string with menu items. The different items are separated by the character
'|' ($7C,dec:124) (e.g. "item1|item2|item3"). The background of the menu is saved automatically. If a
menu is already defined, it is automatically canceled+deleted.
N
The next item is inverted or remains at the end
P
The previous item is inverted or remains at the beginning
S
The menu is removed and replaced with the original background. The current item is sent as a
number (1 to n) (0=no menu displayed)
M n1
The menu is removed and replaced with the original background. Menu macro n1 is called for item
1, menu macro nr+1 for item 2, and so on
A
The menu is removed and replaced with the original background
Macro commands
N n1
Call the (normal) macro with the number n1 (0 to 255) (max. 7 levels)
T n1
Call the touch macro with the number n1 (0 to 255) (max. 7 levels)
M n1
Call the menu macro with the number n1 (0 to 255) (max. 7 levels)
L type n1 n2
Macros of the type 'N', 'T' or 'M' (type 'A' = all macro types) are disabled from the number n1 to n2;
i.e. no longer run when called.
U type n1 n2
Macros of the type 'N', 'T' or 'M' (type 'A' = all macro types) are enabled from number n1 to n2; i.e.
run again when called.
K n1
A page is selected for macros and images n1=0 to 15. if a macro/image is not defined in the current
page 1 to 15, this macro/image is taken from page 0 (e.g. to switch languages or for
horizontal/vertical installation).
W
the current macro/image page is saved (when used in process macros)
R
the last saved macro/image page is restored
automatic (Normal) Macros
G n1 n2
Call the (normal) macro with the number n1 (0 to 255) in n2/10S. Execution is stopped by
commands (e.g. receipt or touch macros).
E n1 n2 n3
Automatically run macros n1 to n2 once only; n3=pause in 1/10s. Execution is stopped by commands
(e.g. receipt or touch macros).
A n1 n2 n3
Automatically run macros n1 to n2 cyclically; n3=pause in 1/10s. Execution is stopped by commands
(e.g. receipt or touch macros).
J n1 n2 n3
Automatically run macros n1 to n2 to n1 (ping pong); n3=pause in 1/10s. Execution is stopped, for
example, by receipt or touch macros.
macro processes
A macro process with the number no (1 to 8) is defined (1=highest priority). The (Normal) Macros
D no type n3 n4 zs n3 to n4 are run successively every zs/10s. type: 1=once only; 2=cyclical; 3=ping pong n3 to n4 to
n3
Z nr zs
a new time zs is assigned to the macro process with the number nr (1 to 8) in 1/10s. if the time zs=0,
execution is stopped.
S n1
all macro processes
settings and outputs
are
via
stopped with n1=0 and restarted
the interface undisturbed
with
n1=1
in
order,
for
example,
to
execute₁
Other commands
n1
Wait n1 tenths of a second before the next command is executed.
A adr
S n1
L n1
H n1
for RS232/RS485 operation only and only possible when Hardware address is 0. The eDIP is
assigned a new address adr (in the Power-On macro).
The tone
second
output
(pin
16)
becomes
n1=0:
OFF;
n1=1:
ON;
n1=2
to
255:
switched
on
for
n1
tenths
o_Of a_FF
LED illumination n1=0: OFF; n1=1: ON; n1=2 to 255: illumination switched on for n1 tenths of a
second.
1
set brightness of the LED illumination n1=0 to 100%. n1=250 save current brightness as starting
brightness; n1=254 switch LED off immediately; n1=255 switch to 100% immediately.
100
W n1 n2
n1=0: Set all output ports
(n2=0); set (n2=1); invert
in accordance
(n2=2);
with
n2
(=6/8-bit
binary
value).
n1=1
to
6/8:
Reset
port
n1 _to
1
B num
data ...
num (=1 to 255) bytes are sent to the send buffer... = num Bytes. in the source text of the macro
programming, the number nUM must not be specified. This is counted by the edip compiler and
entered.
V
the version is sent as a string (e.g. "EA eDIP320-8 V1.0 Rev.A tp+")
I
internal information is sent by the edip.
D n1
After this command, the display goes into power-down mode. n1=0: wake up only after reset; n1=1:
wake up on L level at WUP Pin n1=2: wake up on touch; n1=3: wake up on WUP Pin or Touch