EAEDIP320B-8LW Datasheet, PDF (14/25 Pages) List of Unclassifed Manufacturers – CONTROL UNIT 320x240 WITH INTELLIGENCE

EA eDIP320-8
Page 14
Specifications may be changed without
prior notice. Printing error reserved
ALL COMMANDS AT A GLANCE
The built-in intelligence allows an easy creation of your individual screen content. Below mentioned
commands can be used either directly via the serial interface (see page 17) or together with the self-
definable macro (see pages 19/20).
Command
Codes
Output string L: left justified
C: centered R: right justified
Set font
Font zoom factor
Add. line spacing
Text angle
Text link mode
Text pattern
Text flashing attribute
String for terminal
ESC Z
ESC Z
Draw rectangle
Draw straight line
Continue straight line
Draw point
Point size/line thickness
Link mode
Pattern
ESC G
Delete area
Invert area
Fill area
Area with fill pattern
Draw box
Draw frame
Draw frame box
ESC R
Image from clipboard
Load internal image
Load image
Image zoom factor
Image angle
Mirror Image
Image link mode
Image pattern
Image flashing attribute
Send hard copy
ESC U
Delete display
Invert display
Fill display
Switch display off
Switch display on
ESC D
Delete flashing attribute
Flash inversely
Flashing area pattern
Set flashing time
ESC Q
Define bar graph
Update bar graph
Draw new bar graph
Send bar graph value
Delete bar graph
ESC B
EA eDIP320-8: Command table 1
After
Remarks
reset
Commands for outputting strings
L
C
R
xx1
yy1
text
...
NUL
A string (...) is output to xx1,yy1; end of string: 'NUL' ($00), 'LF' ($0A) or 'CR' ($0D); several lines
are separated by the character '|' ($7C); text between two '~' ($7E) characters flashes on/off; text
between two '@' ($40) characters flashes inversely;
F n1
Set font with the number n1 (0 to 31)
0
Z n1 n2
n1 = X zoom factor (1x to 8x); n2 = Y zoom factor (1x to 8x)
1,1
Y n1
Insert n1 pixels (0 to 15) between two lines as additional line spacing
W n1
Text output angle: n1=0: 0°; n1=1: 90°; n1=2: 180°; n1=3: 270°
0
V n1
Mode n1: 1=set; 2=delete; 3=inverse; 4=replace; 5=inverse replace;
4
M n1
link Text with pattern number n1 (0 to 15);
1
B n1
n1: 0=no flashing; 1=Text flashes on/off; 2=Text flashes inversely
0
T
text ...
Command for outputting a string from a macro to the terminal
Draw straight lines and points
R xx1 yy1 xx2 yy2
Draw four straight lines as a rectangle from xx1,yy1 to xx2,yy2
D xx1 yy1 xx2 yy2
Draw straight line from xx1,yy1 to xx2,yy2
W xx1 yy1
Draw a straight line from last end point to xx1, yy1
0
P xx1 yy1
Set a point at coordinates xx1, yy1
Z n1 n2
n1 = X point size (1 to 15); n2 = Y point size (1 to 15);
1,1
V n1
Set drawing mode n1: 1=set; 2=delete; 3=inverse;
1
M n1
set straight line/point pattern number n1 (0 to 15)
1
Change/draw rectangular areas
L xx1 yy1 xx2 yy2
Delete area from xx1,yy1 to xx2,yy2 (all pixels off)
I xx1 yy1 xx2 yy2
Invert area from xx1,yy1 to xx2,yy2 (invert all pixels)
S xx1 yy1 xx2 yy2
Fill area from xx1,yy1 to xx2,yy2 (all pixels on)
M xx1 yy1 xx2 yy2 n1 Draw area from xx1,yy1 to xx2,yy2 with pattern n1 (always set)
O xx1 yy1 xx2 yy2 n1 Draw rectangle from xx1,yy1 to xx2,yy2 with pattern n1 (always replace)
R xx1 yy1 xx2 yy2 n1 Draw frame of type n1 from xx1,yy1 to xx2,yy2 (always set)
T xx1 yy1 xx2 yy2 n1 Draw frame box of type n1 from xx1,yy1 to xx2,yy2 (always replace)
C xx1 yy1
Bitmap image commands
The current contents of the clipboard are loaded to xx1,yy1 with all the image attributes
I xx1 yy1 no
Load internal image with the no (0 to 255) from the data flash memory to xx1,yy1
L xx1 yy1 Bh7 data ... Load an image to xx1,yy1; see image structure (BH7 format) for image data
Z n1 n2
n1 = X zoom factor (1x to 8x); n2 = Y zoom factor (1x to 8x)
1,1
W n1
output angle of the image: n1=0: 0°; n1=1: 90°; n1=2: 180°; n1=3: 270°
0
X n1
V n1
M n1
B n1
n1: 0=normal display; 1=the image is mirrored horizontally
0
Mode n1: 1=set; 2=delete; 3=inverse; 4=replace; 5=inverse replace;
4
link Text with pattern number n1 (0 to 15)
1
n1: 0=no flashing; 1=image flashes on/off; 2=image flashes inversely: 3=flashes with flash image 0
H xx1 yy1 xx2 yy2
After this command, the image extract is sent in BH7 Format.
Display commands (effect on the entire display)
L
Delete display contents (all pixels off)
I
Invert display contents (invert all pixels)
S
Fill display contents (all pixels on)
A
Display contents become invisible but are retained, commands are still possible
E
Display contents become visible again
On
Flashing area commands
L xx1 yy1 xx2 yy2
Delete the flashing attribute from xx1,yy1 to xx2,yy2
I xx1 yy1 xx2 yy2
Defines an inverted flashing area from xx1,yy1 to xx2,yy2
M xx1 yy1 xx2 yy2 n1 Defines a flashing area with pattern n1 (on/off) from xx1,yy1 to xx2,yy2
Z n1
Set the flashing time n1= 1 to 15 in 1/10s; 0=deactivate flashing function
6
Bar graph commands
R
Define bar graph to L(eft), R(ight), O(ben) (up), U(nten) (down) with number
L
O
no
xx1
yy1
xx2 yy2
SV
EV
Typ
pat
no. xx1,yy1,xx2,yy2 form the rectangle enclosing the bar graph. sv, ev arNe othebar
values for 0% and 100%. Type: 0=bar; 1=bar in rectangle; pat=bar patterndefine
U
type: 2=line; 3=line in rectangle; pat=line width
A n1 valu
Set and draw the bar graph with the number n1 to the new user 'value'.
Z n1
entirely reDraw the bar graph with the number n1
S n1
Send the current value of bar graph number n1
D n1 n2
the definition of the bar graph with the number n1 becomes invalid. If the bar graph was defined as
input with touch, this touch field will also be deleted. n2=0: Bar graph remains visible; n2=1: Bar
graph is deleted