SGU01G64A1BG1SA-BBR Datasheet, PDF (1/16 Pages) List of Unclassifed Manufacturers – 1024MB DDR3 . SDRAM UDIMM

Data Sheet
Rev.1.1 11.04.2013
1024MB DDR3 – SDRAM UDIMM
240 Pin UDIMM
SGU01G64A1BG1SA-xxR
1GByte in FBGA Technology
RoHS compliant
Options:
 Data Rate / Latency
DDR3 1066 MT/s CL7
DDR3 1333 MT/s CL9
DDR3 1600 MT/s CL11
Marking
-BB
-CC
-DC
 Module Density
1024MB with 8 dies and 1 rank
Standard Grade (T_A)
(T_C)
W-Grade
(T_A)
(T_C)
0°C to 70°C
0°C to 85°C
-40°C to 85°C
-40°C to 95°C
The refresh rate has to be doubled when 85°C<TC<95°C
Environmental Requirements:
 Operating temperature (ambient)
Standard Grade
0°C to 70°C
W-Grade
-40°C to 85°C
 Operating Humidity
10% to 90% relative humidity, noncondensing
 Operating Pressure
105 to 69 kPa (up to 10000 ft.)
 Storage Temperature
-55°C to 100°C
 Storage Humidity
5% to 95% relative humidity, noncondensing
 Storage Pressure
1682 PSI (up to 5000 ft.) at 50°C
Features:
 240-pin 64-bit DDR3 unbuffered Dual-In-Line Double Data
Rate Synchronous DRAM module
 Module organization: single rank 128M x 64
 VDD = 1.5V ±0.075V, VDDQ 1.5V ±0.075V
 1.5V I/O ( SSTL_15 compatible)
 serial presence-detect (SPD) EEPROM
 Gold-contact pads
 This module is fully pin and functional compatible to the
JEDEC PC3-10600 spec. and JEDEC- Standard MO-269.
(see www.jedec.org)
 The pcb and all components are manufactured according
to the RoHS compliance specification [EU Directive
2002/95/EC Restriction of Hazardous Substances (RoHS)]
 DDR3 - SDRAM component Samsung K4B1G0846G
 128Mx8 DDR3 SDRAM in PG-TFBGA-78 package
 8-bit pre-fetch architecture
 Programmable CAS Latency, CAS Write Latency, Additive
Latency, Burst Length and Burst Type.
 On-Die-Termination (ODT) and Dynamic ODT for improved
signal integrity.
 Refresh. Self Refresh and Power Down Modes.
 ZQ Calibration for output driver and ODT.
 System Level Timing Calibration Support via Write Leveling
and Multi Purpose Register (MPR) Read Pattern.
Figure: mechanical dimensions¹
Swissbit AG
Industriestrasse 4
CH-9552 Bronschhofen
Fon: [phone]
Fax: [phone]
1_{if no tolerances specified ± 0.15mm}
www.swissbit.com
eMail: [e-mail]
Page 1
of 16