MC80F0224 Datasheet, PDF (5/128 Pages) List of Unclassifed Manufacturers – 8-BIT SINGLE-CHIP MICROCONTROLLERS

Preliminary
MC80F0208/16/24
MC80F0208/16/24
MC80C0208/16/24
CMOS SINGLE-CHIP 8-BIT MICROCONTROLLER
WITH 10-BIT A/D CONVERTER AND UART
1. OVERVIEW
1.1 Description
The MC80F0208/16/24 is advanced CMOS 8-bit microcontroller with 8K/16K/24K bytes of FLASH(ROM). This is a powerful microcon-
troller which provides a highly flexible and cost effective solution to many embedded control applications. This provides the following
standard features : 8K/16K/24K bytes of FLASH, 1K bytes of RAM, 8/16-bit timer/counter, watchdog timer, watch timer, 10-bit A/D con-
verter, 8-bit Serial Input/Output, UART, buzzer driving port, 10-bit PWM output and on-chip oscillator and clock circuitry. It also has 8
high current I/O pins with typical 20mA. In addition, the MC80F0208/16/24 supports power saving modes to reduce power consumption.
Device Name
FLASH
MASK ROM
MC80F0208Q MC80C0208Q
MC80F0208K MC80C0208K
MC80F0216Q MC80C0216Q
MC80F0216K MC80C0216K
MC80F0224Q MC80C0224Q
MC80F0224K MC80C0224K
FLASH(ROM)
Size
8KByte
16KByte
24KByte
RAM
1024
Byte
1024
Byte
1024
Byte
ADC
PWM I/O PORT Package
8 channel 1 channel 36 port
8 channel 1 channel 36 port
8 channel 1 channel 36 port
44MQFP
42SDIP
44MQFP
42SDIP
44MQFP
42SDIP
1.2 Features
• 8K/16K/24K Bytes On-chip ROM
• FLASH Mermory
- Endurance : 100 cycles
- Data Retention : 10 years
• 1024 Bytes On-chip Data RAM
(Included stack memory)
• Minimum Instruction Execution Time
- 333ns at 12MHz (NOP instruction)
• 36 I/O Ports
• One 8-bit Basic Interval Timer
• Four 8-bit and one 16-bit Timer/Event counter
(or three 16-bit Timer/Event counter)
• One Watchdog timer
• One Watch timer
• One 10-bit PWM
• 8 channel 10-bit A/D converter
• Three 8-bit Serial Communication Interface
- One Serial I/O and two UART
• One Buzzer Driving port
- 488Hz ~ 250kHz@4MHz
• Four External Interrupt input ports
• Fifteen Interrupt sources
- Basic Interval Timer(1)
- External input(4)
- Timer/Event counter(5)
- ADC(1)
- Serial Interface(1), UART(2)
- WDT and Watch Timer(1)
• Built in Noise Immunity Circuit
- Noise filter
- 3-level Power fail detector [3.0V, 2.7V, 2.4V]
• Power Down Mode
- Stop, Sleep mode
• Operating Voltage Range
- 2.7V ~ 5.5V (@ 8MHz)
- 4.5V ~ 5.5V (@ 12MHz)
MAR. 2005 Ver 0.2
1