CM16022ASFAYA-03 Datasheet, PDF (22/26 Pages) List of Unclassifed Manufacturers – LCD MODULE SPECIFICATION

Confidential Document
(2) Pixel shape ( with Projection)
4 Uniformity of Pixel
Should not be connected to
next pixel
0.152
(3) Pin hole
X
Y
( X + Y )/2 ≤ 0.02mm
(Less than 0.1 mm is no counted)
(4) Deformation
X ( X + Y ) / 2 ≤ 0.3mm
Major
Class of
defects
Minor
Y
Total acceptable number : 1/pixel, 5/cell
AQL 0.65%
AQL 1.00%
AQL 2.5%
Definition
It is a defect that is likely to result in failure or to
reduce materially the usability of the product for the
intended function.
It is a defect that is likely to assembly size and not
result in functioning problem.
It is a defect that will not result in functioning problem
with deviation classified.
11.3 Sampling Condition
Unless otherwise agree in written, the sampling inspection shall be
applied to the incoming inspection of customer.
Lot size: Quantity of shipment lot per model.
Sampling type: normal inspection, single sampling
Inspection level: Level II
Sampling table: MIL-STD-105E
Page: 22 / 26