CM16022ASFAYA-03 Datasheet, PDF (19/26 Pages) List of Unclassifed Manufacturers – LCD MODULE SPECIFICATION

Confidential Document
11. QUALITY ASSURANCE
11.1 Test Condition
11.1.1 Temperature and Humidity(Ambient Temperature)
Temperature : 20 ± 5°C
Humidity
: 65 ± 5%
11.1.2 Operation
Unless specified otherwise, test will be conducted under
function state.
11.1.3 Container
Unless specified otherwise, vibration test will be conducted to
the product itself without putting it in a container.
11.1.4 Test Frequency
In case of related to deterioration such as shock test. It will be
conducted only once.
11.1.5 Test Method
No.
Parameter
Conditions
1 High Temperature Operating
2 Low Temperature Operating
50 ± 2 °C
0 ± 2 °C
3 High Temperature Storage
70 ± 2 °C
4 Low Temperature Storage
-20 ± 2 °C
Vibration Test
5
(Non-operation state)
Total fixed amplitude : 1.5mm
Vibration Frequency : 10 ~ 55Hz
One cycle 60 seconds to 3 directions
of X.Y.Z. for each 15 minutes
6
Damp Proof Test
(Non-operation state)
40°C ± 2°C, 90~95%RH, 96h
Shock Test
7 (Non-operation state)
To be measured after dropping from
60cm high once concrete surface in
packing state
Note 1: Returned under normal temperature and humidity for 4 hrs.
Note 2: No dew condensation to be observed.
Note 3: No change on display and in operation under the test condition
Regulations
Note 3
Note 3
Note 3
Note 3
Note 3
Note 1,2
Note 3
Page: 19 / 26