MA828 Datasheet, PDF (11/16 Pages) List of Unclassifed Manufacturers – THREE-PHASE PULSE WIDTH MODULATION WAVEFORM GENERATOR

MA828
ELECTRICAL CHARACTERISTICS
These characteristics are guaranteed over the following conditions (unless otherwise stated):
V_DD
=
15V65%,
T
AMB
=
125°C
DC Characteristics
Characteristic
Value
Symbol
Units
Min. Typ. Max.
Conditions
Input high voltage
Input low voltage
Input leakage current
Output high voltage
Output low voltage
Supply current (static)
Supply current (dynamic)
Supply voltage
V_IH
2
V
V_IL
0·8 V
I_IN
10
µA V_IN = V_SS or V_DD
V_OH
4·0 .4·5
V I_OH = 24mA
V_OL
,0·2 0·4
V
I_OL = 4mA
I_{DD (static)}
100 µA All outputs open circuit
I_{DD (dynamic)}
,10 20 mA f_CLK = 10MHz
V_DD
4·75 5·0 7·5
V
AC Characteristics
Characteristic
Value
Symbol
Units
Min. Typ. Max.
Conditions
Clock frequency
f_CLK
SET TRIP = 0 → outputs tripped
t_TRIP
→TRIP = 0
12·5
2/f_CLK 3/f_CLK
2/f_CLK 3/f_CLK
MHz
µs
µs
M : S ratio = 1 : 1 620%
f_CLK in MHz
f_CLK in MHz
NOTE 1. For microprocessor interface timings, see Intel and Motorola bus timings (Tables 1 and 2).
ABSOLUTE MAXIMUM RATINGS
Supply voltage, V_DD
Voltage on any pin
Current through any I/O pin
10V
V_SS20·3V to V_DD10·3V
610mA
Storage temperature
265°C to 1125°C
Operating temperature range
0°C to 170°C
The temperature ranges quoted apply to all package types.
Many package types are available and extended temperature
ranges can be offered for some. Further information is available
on request.
Stresses above those listed in the Absolute Maximum Rat-
ings may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these
conditions, or at any other condition above those indicated in the
operations section of this specification, is not implied. Exposure
to Absolute Maximum Rating conditions for extended periods
may affect device reliability.
11