Q2406 Datasheet, PDF (35/81 Pages) List of Unclassifed Manufacturers – SELF CONTAINED E GSM/GPRS 900/1800 OR 850/1900 BI BAND MODULE

2.12.3 Speaker outputs
WM_PRJ_Q2400_PTS_002 - 002
24th January 2003
2.12.3.1 Speaker 2 Outputs
Pin description
Signal Pin # I/O
SPK2P
45
O
SPK2N
47
O
I/O type
Analog
Analog
Description
Speaker 2 positive output
Speaker 2 negative output
2.12.3.2 Speaker 1 Outputs
Pin description
Signal Pin # I/O
SPK1P
41
O
SPK1N
43
O
I/O type
Analog
Analog
Description
Speaker 1 positive output
Speaker 1 negative output
2.12.4 Buzzer Output
The buzzer output is a digital one. A buzzer can be directly connected between
this output and VBATT. The maximum current is 80 mA (PEAK). A diode
against transient peak voltage must be connected as described below.
VBATT
D1
C1
???
Figure 8 : Buzzer connection
R1 must be chosen in order to limit the current at I_PEAK max.
C1 = 0 to 100 nF (depending on the buzzer type).
Recommended characteristics for the buzzer :
• Type : electro-magnetic.
• Impedance : 7 to 30 Ω
• Sensitivity : 90 dB SPL min @ 10 cm
Signal
BUZ
Pin #
49
Pin description
I/O
I/O type
O
Analog
Description
Buzzer output
confidential ©
Page : 35 / 81
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.