English
Language : 

CCD47-20 Datasheet, PDF (11/11 Pages) List of Unclassifed Manufacturers – High Performance CCD Sensor
ORDERING INFORMATION
Options include:
* Temporary Quartz Window
* Permanent Quartz Window
* Temporary Glass Window
* Permanent Glass Window
* Fibre-optic Coupling
* UV Coating
* X-ray Phosphor Coating
For further information on the performance of these and other
options, please contact e2v technologies.
HANDLING CCD SENSORS
CCD sensors, in common with most high performance MOS IC
devices, are static sensitive. In certain cases a discharge of
static electricity may destroy or irreversibly degrade the device.
Accordingly, full antistatic handling precautions should be
taken whenever using a CCD sensor or module. These include:-
* Working at a fully grounded workbench
* Operator wearing a grounded wrist strap
* All receiving socket pins to be positively grounded
* Unattended CCDs should not be left out of their
conducting foam or socket.
Evidence of incorrect handling will invalidate the warranty. All
devices are provided with internal protection circuits to the gate
electrodes (pins 3, 4, 5, 7, 13, 14, 15, 16, 17, 18, 19, 20, 26, 28,
29, 30, 31) but not to the other pins.
HIGH ENERGY RADIATION
Device parameters may begin to change if subject to an ionising
dose of greater than 104 rads.
Certain characterisation data are held at e2v technologies.
Users planning to use CCDs in a high radiation environment
are advised to contact e2v technologies.
TEMPERATURE LIMITS
Min Typical Max
Storage . . . . . . . 73
–
373
K
Operating . . . . . . . 73
243
323
K
Operation or storage in humid conditions may give rise to ice on
the sensor surface on cooling, causing irreversible damage.
Maximum device heating/cooling . . . . 5 K/min
Whilst e2v technologies has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences of any use
thereof and also reserves the right to change the specification of goods without notice. e2v technologies accepts no liability beyond that set out in its standard
conditions of sale in respect of infringement of third party patents arising from the use of tubes or other devices in accordance with information contained herein.
# e2v technologies
Printed in England
CCD47-20, page 11