TIGER560 Datasheet, PDF (10/37 Pages) List of Unclassifed Manufacturers – USB Controller for Low Cost VoIP solutions

Tiger560
Advance Information
Signal descriptions
Signal Name
AUX0
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
DCLK
DIN
DMINUS
DOUT
DPLUS
EXTRST#
FSC
HA0
HA1
HA2
HA3
Type Description
I/O PIB aux port bit 0
I/O PIB aux port bit 1
I/O PIB aux port bit 2
I/O PIB aux port bit 3
I/O PIB aux port bit 4
I/O PIB aux port bit 5
I/O PIB aux port bit 6
I/O Serial port data clock
I
Serial port data input
I/O USB D-
I
Serial port data output
I/O USB D+
O PIB reset
I/O Serial port frame sync
I/O PIB address 0
I/O PIB address 1
I/O PIB address 2
I/O PIB address 3
HD0 – HD7
READ#
RESET#
SAD0 – SAD12
SAD13
SAD14
SDA0 – SDA 7
V_CC3
VCLK
WRITE#
XTAL1
XTAL2
I/O PIB data bus
O PIB read
I
System reset input
O Memory address bus
O Memory address bus
O Memory address bus
I/O Memory data bus
O 3.3V output for USB port
I/O Memory clock
O PIB write
I
Crystal oscillator
O Crystal oscillator
Alternate function(s)
PIB HA4
SPI interface CDIN
PIB HA5
SPI interface CDOUT
USB suspend output
Audio feedback comparison output
ROMCS#
Product ID [15] input on reset
Self/bus power input on reset
Serial uP interface CSB
Serial uP interface CCLK
HA[3:2] : mod selection
00: Tiger500 mode
01: New Tiger560 USB DP table
10: Testing mode
11: Use external ROM for USB DP
Vendor ID [8 – 15] input on reset
Product ID [0 – 12] input on reset
SAD0 -10 for ROMAD0 -10
Product ID [13] input on reset
4Mbit parallel port WR#
Product ID [13 – 14] input on reset
4Mbit parallel port RD#
Vendor ID [0 – 7] input on reset
4Mbit parallel port data bus
ROMDA0 - 7
Revision 1.1 released on 2/20/01
Page 10