CA04F2FT5AUD010G_12 Datasheet, PDF (9/30 Pages) EPCOS – Ceramic transient voltage suppressors

ESD/EMI filters
ESD/EMI filter series
B72862F1050S160
Part orientation in tape pocket for blister tape
For discrete chip, case sizes 0603, 0805,
1206, 1210, 1812 and 2220
For array, case sizes 0612
For arrays 0506 and 1012
For filter array, case size 0508
Additional taping information
Reel material
Tape material
Tape break force
Top cover tape strength
Top cover tape peel force
Tape peel angle
Cavity play
Polystyrol (PS)
Polystyrol (PS) or Polycarbonat (PC) or PVC
min. 10 N
min. 10 N
0.2 to 0.6 N for 8-mm tape and 0.2 to 0.8 N for
12-mm tape at a peel speed of 300 mm/min
Angle between top cover tape and the direction of feed
during peel off: 165° to 180°
Each part rests in the cavity so that the angle between
the part and cavity center line is no more than 20°
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 30