CA04F2FT5AUD010G_12 Datasheet, PDF (3/30 Pages) EPCOS – Ceramic transient voltage suppressors

ESD/EMI filters
ESD/EMI filter series
B72862F1050S160
Features
High attenuation in a wide frequency range covering
GSM, UMTS, GPRS, WLAN, Bluetooth and GPS
ESD robustness acc. to IEC 61000-4-2 level 4 on
input and output ports
Low THD+N (lower than -100 dB @ 1 kHz)
Up to 20 component functions integrated in one
package
Low DC leakage currents
Bidirectional protection
Low inductance due to common ground contacts
High frequency stability versus temperature
RoHS-compatible
Applications
Reliable ESD/EMI filtering of audio lines (2-fold
array), mobile phones, PDAs, notebooks
Design
Multilayer technology
0405/1014 EIA/mm case sizes
Nickel barrier termination (AgNiSn) recommended
for lead-free soldering (see “Soldering directions”)
Lack of plastic or epoxy encapsulation for
flammability rating better than UL 94 V-0
Typical frequency characteristic curves
Typical frequency characteristic curves are attached to
the data sheet.
Array
Internal circuits
2-fold array with common
ground
Available case sizes:
EIA Metric
0405 1014
Version
2-fold array
General technical data
Maximum DC operating voltage
Contact discharge ESD capability
Air discharge ESD capability
Minimum cut-off frequency
Typical insertion loss
Maximum clamping voltage
Operating temperature
Storage temperature
to IEC 61000-4-2
to IEC 61000-4-2
(50 Ω, 0 V)
(900 MHz, 50 Ω)
(1 A, 8/20 µs)
V_DC,max
V_ESD,contact
V_ESD,air
f_cut-off,min
α_typ
V_clamp,max
T_op
LCT/UCT
5.5
8
15
10
60
30
40/+85
40/+125
V
kV
kV
MHz
dB
V
°C
°C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 30