EN25S16 Datasheet, PDF (58/58 Pages) Eon Silicon Solution Inc. – 16 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector

Revisions List
EN25S16
Revision No Description
Date
A
Initial Release
2011/01/04
B
Add package option of 8-pin 200mil VSOP
2011/02/08
C
Revise t_SHSL (CS# High Time for read) from 10ns to 30ns on page 51. _2011/03/01
D
1. Correct the typo of 6 dummy clocks on page 27.
2. Update Figure 24. Write Suspend/Resume Flow on page 38.
2011/05/26
1. Add the note “5. This flow cannot release the device from Deep power
E
down mode.” on page 15.
2011/07/05
2. Remove the 8-pin 200mil SOP package option.
F
Update Table 15. t_CH and t_CL (min.) from 6ns to 4.5ns on page 51.
2011/10/19
1. Remove the Fast Read Burst (0Dh) command.
G
2.
Update
the
Table
13.
DC
Characteristics
I_CC1:
Standby
current
2011/11/10
(max.) from 10uA to 20uA on page 48.
3. Update the Table 15. AC Characteristics on page 49.
H
Supplement the description of suspend and resume latency timing on
page 34, 35, 36 and 37.
2011/12/16
This Data Sheet may be revised by subsequent versions
58
or modifications due to changes in technical specifications.
©2004 Eon Silicon Solution, Inc.,
Rev. H, Issue Date: 2011/12/16
www.eonssi.com