EN29LV160B_11 Datasheet, PDF (20/43 Pages) Eon Silicon Solution Inc. – 16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 3.0 Volt-only

Table 10. Status Register Bits
EN29LV160B
DQ
Name
Logic Level
Definition
‘1’
Erase Complete or
erase Sector in Erase suspend
7
DATA#
POLLING
‘0’
DQ7
Erase On-Going
Program Complete or
data of non-erase Sector
during Erase Suspend
DQ7#
Program On-Going
6
TOGGLE
BIT
‘-1-0-1-0-1-0-1-’
DQ6
Erase or Program On-going
Read during Erase Suspend
‘-1-1-1-1-1-1-1-‘
Erase Complete
5
TIME OUT BIT
‘1’
‘0’
Program or Erase Error
Program or Erase On-going
ERASE TIME
‘1’
Erase operation start
3
OUT BIT
‘0’
Erase timeout period on-going
Chip Erase, Erase or Erase
suspend on currently
addressed
2
TOGGLE
BIT
‘-1-0-1-0-1-0-1-’
Sector. (When DQ5=1, Erase
Error due to currently
addressed Sector. Program
during Erase Suspend on-
going at current address
DQ2
Erase Suspend read on
non Erase Suspend Sector
Notes:
DQ7 DATA# Polling: indicates the P/E status check during Program or Erase, and on completion before checking bits DQ5 for
Program or Erase Success.
DQ6 Toggle Bit: remains at constant level when P/E operations are complete or erase suspend is acknowledged. Successive
reads output complementary data on DQ6 while programming or Erase operation are on-going.
DQ5 Time Out Bit: set to “1” if failure in programming or erase
DQ3 Sector Erase Command Timeout Bit: Operation has started. Only possible command is Erase suspend (ES).
DQ2 Toggle Bit: indicates the Erase status and allows identification of the erased Sector.
This Data Sheet may be revised by subsequent versions
20
or modifications due to changes in technical specifications.
© 2004 Eon Silicon Solution, Inc.,
Rev. I, Issue Date: 2011/10/26
www.eonssi.com