MA9264 Datasheet, PDF (15/15 Pages) Dynex Semiconductor – Radiation Hard 8192x8 Bit Static RAM

ORDERING INFORMATION
MA9264
Unique Circuit Designator
Radiation Tolerance
S Radiation Hard Processing
R 100 kRads (Si) Guaranteed
Q 300 kRads (Si) Guaranteed
For radiation levels above those
stated please contact Marketing
MAx9264xxxxxxxx
T TTL
C CMOS
Package Type
C Ceramic DIL (Solder Seal)
F Flatpack (Solder Seal)
L Leadless Chip Carrier
N Naked Die
For details of reliability, QA/QC, test and assembly
options, see ‘Manufacturing Capability and Quality
Assurance Standards’ Section 9.
70 70ns Speed
95 95ns Speed
QA/QCI Process
(See Section 9 Part 4)
Test Process
(See Section 9 Part 3)
Assembly Process
(See Section 9 Part 2)
Reliability Level
L Rel 0
C Rel 1
D Rel 2
E Rel 3/4/5/STACK
B Class B
S Class S
http://www.dynexsemi.com
e-mail: [e-mail]
HEADQUARTERS OPERATIONS
DYNEX SEMICONDUCTOR LTD
Doddington Road, Lincoln.
Lincolnshire. LN6 3LF. United Kingdom.
Tel: [phone]
Fax: [phone]
DYNEX POWER INC.
Unit 7 - 58 Antares Drive,
Nepean, Ontario, Canada K2E 7W6.
Tel: [phone]
Fax: [phone]
Toll Free: 1.888.33.DYNEX (39639)
CUSTOMER SERVICE CENTRES
France, Benelux, Italy and Spain Tel: [phone]. Fax: [phone]
North America Tel: [phone]. Fax: [phone]
UK, Germany, Scandinavia & Rest Of World Tel: [phone]. Fax: [phone]
SALES OFFICES
France, Benelux, Italy and Spain Tel: [phone]. Fax: [phone]
Germany Tel: [phone]
North America Tel: [phone]. Fax: [phone]. Toll Free: 1.888.33.DYNEX (39639) /
Tel: [phone]. Fax: [phone] / Tel: [phone]. Fax: [phone].
UK, Germany, Scandinavia & Rest Of World Tel: [phone]. Fax: [phone]
These offices are supported by Representatives and Distributors in many countries world-wide.
© Dynex Semiconductor 2000 Publication No. DS3692-7 Issue No. 7.0 January 2000
TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM
Datasheet Annotations:
Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:-
Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been
started.
Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change.
Advance Information: The product design is complete and final characterisation for volume production is well in hand.
This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded
as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company
reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any
guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and
to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury
or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request.
All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners.
15/15