MA17503 Datasheet, PDF (13/34 Pages) Dynex Semiconductor – Radiation Hard MIL-STD-1750A Interrupt Unit

5.0 TIMING CHARACTERISTICS
This section provides the detailed timing specifications for
the MA17503 Interrupt Unit. Figure 3 depicts the test loads
used to obtain the timing data. Figures 4 through 15 depict the
timing waveforms associated with various MA17503 signals.
Table 7 lists values for the parameters specified in the timing
waveforms. All timing values provided in Table 7 are valid over
the full military temperature range (-55°C to +125°C), assume
the recommended operating conditions, and are measured
from 50% point to 50% point (50% of VDD supply voltage,
unless otherwise specified). Crosshatching in Figures 4
through 15 indicates either a ,“don’t care” state or
indeterminate state.
MA17503
Figure 3: Test Load
Figure 4: Microcode Operations
13/34