|
MA17503 Datasheet, PDF (1/34 Pages) Dynex Semiconductor – Radiation Hard MIL-STD-1750A Interrupt Unit | |||
|
Replaces June 1999 version, DS3566-4.0
MAM1A715750033
Radiation Hard MIL-STD-1750A Interrupt Unit
DS3566-5.0 January 2000
The MA17503 Interrupt Unit is a component of the MAS281
chip set. Other chips in the set include MA17501 Execution Unit
and the MA17502 Control Unit. Also available is the peripheral
MA31751 Memory Management/Block Protection Unit. The
lnterrupt Unit, in conjunction with these additional chips,
implements the full MIL-STD-1750A Instruction Set
Architecture.
The MA17503 - consisting of the Pending Interrupt
Register, Mask Register, Interrupt Priority Encoder, Fault
Register, Timer A, Timer B, Trigger-Go Counter, Bus Fault
Timer, and DMA interface - handles all interrupt fault, and DMA
interfacing, in addition to providing all three hardware timers.
The Interrupt Unit also implements 26 of the MIL-STD-1750A
specified l/O commands. Table 1 provides brief signal
definitions.
The MA17503 is offered in dual-in-line, flatpack or leadless
chip carrier packaging. Screening and packaging options are
described at the end of this document.
BLOCK DIAGRAM
FEATURES
s Mil-Std-1750A Instruction Set Architecture
s Full Performance over Military Temperature Range (-55°C
to +125°C)
s Radiation Hard CMOS/SOS Technology
s Interrupt Handler
⢠9 User Interrupt Inputs
⢠Pending Interrupt Register
⢠Interrupt Mask Register
⢠Interrupt Priority Encoder
s Fault Handler
⢠8 User Faults Inputs
⢠Fault Register
s Timers
⢠Timer A
⢠Timer B
s Trigger-Go
s DMA Interface
s Interface Discretes
⢠Normal Power-Up
⢠Start-Up ROM Enable
⢠Configuration Word Enable
s Implements 26 MIL-STD-1750A Specified l/O Commands
s MAS281 Integrated Built-ln Self Test
s TTL Compatible System Interface
1/34
|
▷ |