DA9053 Datasheet, PDF (92/183 Pages) Dialog Semiconductor – Flexible High-Power System PMIC with Switching USB Power Manager

DA9053
Flexible High-Power System PMIC with 1.8 A
Switching USB Power Manager
5:4 R/W GPIO3_PIN
6 R/W GPIO3_Type
7 R/W GPIO3_ MODE
1: GPI: debouncing on, no LDO5_EN control
ADCIN6: debouncing on and generate wake up
GPO: Sets output to high level
PIN assigned to
00: TSIYN
01: GPI
10: GPO (Open drain)
11: GPO (Push-pull)
0: GPI: active low
GPO: supplied from VDD_IO1/internal pull-up in open-
drain mode
1: GPI: active high
GPO: supplied from VDD_IO2/external pull-up in
open-drain mode
0: GPI: debouncing off
GPO: Sets output to low level
1: GPI: debouncing on and generate wake-up
GPO: Sets output to high level
If GPIO2 pin = 01 and GPIO2 mode = 0 then bit 2 of register R12 should also be set to avoid small
nIRQ pulse generation.
Register
Address
R23
GPIO_4-5
Bit Type Label
1:0 R/W GPIO4_PIN
2 R/W GPIO4_Type
3 R/W GPIO4_ MODE
5:4 R/W GPIO5_PIN
6 R/W GPIO5_Type
Description
PIN assigned to
00: TSIYP
01: GPI
10: GPO (Open drain)
11: GPO (Push-pull)
0: GPI: active low
GPO: supplied from VDD_IO1/internal pull-up in open-
drain mode
1: GPI: active high
GPO: supplied from VDD_IO2/external pull-up in
open-drain mode
0: GPI: debouncing off
GPO: Sets output to low level
1: GPI: debouncing on and generate wake-up
GPO: Sets output to high level
PIN assigned to
00: TSIXN
01: GPI
10: GPO (Open drain)
11: GPO (Push-pull)
0: GPI: active low
GPO: supplied from VDD_IO1/internal pull-up in open-
drain mode
1: GPI: active high
GPO: supplied from VDD_IO2/external pull-up in
open-drain mode
Datasheet
CFR0011-120-00
Revision 2.1
92 of 183
31-Aug-2016
© 2016 Dialog Semiconductor