DA9061_17 Datasheet, PDF (66/82 Pages) Dialog Semiconductor – PMIC for applications requiring up to 6 A

DA9061
PMIC for applications requiring up to 6 A
Table 59: LDO2_CONT (0x027)
Field
Bit
Type
LDO2_CONF
7:7
R/W
VLDO2_GPI
6:5
R/W
Reserved
LDO2_PD_DIS
LDO2_GPI
4:4
3:3
R/W
2:1
R/W
LDO2_EN
0:0
R/W
Description
Default supply, or sequenced and on in POWERDOWN
Voltage controlling GPI
(passive to active transition: VLDO*_B, act. to pas.: VLDO*_A)
00: Sequencer controlled
01: Select GPI1
10: Select GPI2
11: Select GPI3
Reserved
Disable pull-down resistor when disabled.
Enabling GPI
(passive to active transition: enable, act. to pas.: disable)
00: Sequencer controlled
01: Select GPI1
10: Select GPI2
11: Select GPI3
Disable (0) / enable (1) the LDO (dependent on on/off priority
order)
Table 60: LDO3_CONT (0x028)
Field
Bit
Type
LDO3_CONF
7:7
R/W
VLDO3_GPI
6:5
R/W
Reserved
LDO3_PD_DIS
LDO3_GPI
4:4
3:3
R/W
2:1
R/W
LDO3_EN
0:0
R/W
Description
Default supply, or sequenced and on in POWERDOWN
Voltage controlling GPI
(passive to active transition: VLDO*_B, act. to pas.: VLDO*_A)
00: Sequencer controlled
01: Select GPI1
10: Select GPI2
11: Select GPI3
Reserved
Disable pull-down resistor when disabled.
Enabling GPI
(passive to active transition: enable, act. to pas.: disable)
00: Sequencer controlled
01: Select GPI1
10: Select GPI2
11: Select GPI3
Disable (0) / enable (1) the LDO (dependent on on/off priority
order)
Datasheet
CFR0011-120-00
Revision 3.3
66 of 82
04-Apr-2017
© 2017 Dialog Semiconductor