DA9061_17 Datasheet, PDF (59/82 Pages) Dialog Semiconductor – PMIC for applications requiring up to 6 A

DA9061
PMIC for applications requiring up to 6 A
Table 43: CONTROL_C (0x010)
Field
Bit
Type
DEF_SUPPLY
7:7
R/W
SLEW_RATE
6:5
R/W
OTPREAD_EN
4:4
R/W
AUTO_BOOT
3:3
R/W
DEBOUNCING
2:0
R/W
Description
1: OTP enables / disables all supplies (except LDOCORE) when
sequencer enters slot 0.
Buck DVC slew rate step width [10 mV/step (20 mV/step for Buck3)]
00: 4 µs
01: 2 µs
10: 1 µs
11: 0.5 µs
When leaving POWERDOWN mode supplies are configured from
OTP.
After progressing from RESET mode the sequencer...
0: ... requires a wakeup event to start-up.
1: ... starts up automatically.
GPI, nONKEY and nRESETREQ debounce time
000: no debouncing
001: 0.1 ms
010: 1.0 ms
011: 10.24 ms
100: 51.2 ms
101: 256 ms
110: 512 ms
111: 1024 ms
Table 44: CONTROL_D (0x011)
Field
Bit
Type
Reserved
7:3
TWDSCALE
2:0
R/W
Description
Reserved
Watchdog timeout scaling
0: Watchdog disabled
Other: Timeout = 2.5 * 2^(TWDSCALE-1) s
Table 45: CONTROL_E (0x012)
Field
Bit
Type
V_LOCK
7:7
R/W
Reserved
6:0
Description
Prevent host from writing to registers 0x81 - 0x120 except 0x100.
Reserved
Datasheet
CFR0011-120-00
Revision 3.3
59 of 82
04-Apr-2017
© 2017 Dialog Semiconductor