DRP-24V100W1NN Datasheet, PDF (2/13 Pages) Delta Electronics, Inc. – CliQ II DIN Rail Power Supply

TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 91.2W 1 Phase, NEC Class 2 / DRP-24V100W1NN
Specifications
Input Ratings / Characteristics
Nominal Input Voltage
Input Voltage Range
Nominal Input Frequency
Input Frequency Range
DC Input Voltage Range*
Input Current
Efficiency at 100% Load
Max Inrush Current (Cold Start)
Power Factor
Leakage Current
*Fulfills tested condition, additional testing for system approval might be necessary.
Output Ratings / Characteristics
Nominal Output Voltage
Output Voltage Tolerance
Output Voltage Adjustment Range
Output Current
Output Power
Line Regulation
Load Regulation
PARD (20MHz)
Rise Time
Start-up Time
Hold-up Time
Dynamic Response (Overshoot & Undershoot O/P Voltage)
Start-up with Capacitive Loads
100-240Vac
85-264Vac
50-60Hz
47-63Hz
120-375Vdc
< 1.00A @ 115Vac, < 0.53A @ 230Vac
> 88.0% @ 115Vac, > 89.0% @ 230Vac
< 30A @ 115Vac, < 60A @ 230Vac
> 0.99 @ 115Vac, > 0.94 @ 230Vac
< 0.5mA @ 240Vac
24Vdc
± 2% (initial set point tolerance from factory)
22-24
3.80A
91.2W
< 0.5% (@ 85-264Vac input, 100% load)
< 1% at -25°C to +25°C
< 2% at +25°C to +50°C
(@ 85-264Vac input, 0-100% load)
< 150mVpp
< 100ms @ nominal input (100% load)
< 2,000ms @ nominal input (100% load)
> 20ms @ 115Vac,
> 30ms @ 230Vac (100% load)
± 5% @ 0-100% load
8,000µF Max
2
All parameters are specified at 25°C ambient unless otherwise indicated.
www.DeltaPSU.com (January 2014, Rev. 00)