DRP-24V100W1NN Datasheet, PDF (1/13 Pages) Delta Electronics, Inc. – CliQ II DIN Rail Power Supply

TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24V 91.2W 1 Phase, NEC Class 2 / DRP-24V100W1NN
Highlights & Features
– Universal AC input range without power de-rating
– UL 1310 safety approval
– NEC Class 2 power supply and Limited Power Source (LPS)
approvals
– Built-in active PFC, PF > 0.99 @ 115Vac
– Full corrosion resistant Aluminium chassis
– Conforms to harmonic current IEC/EN 61000-3-2, Class A
– Conformal coating on PCBA to protect against chemical and
dust pollutants
– Overvoltage / Overcurrent / Over Temperature / Short Circuit
Protections
Safety Standards
CB Certified for worldwide use
Model Number:
DRP-24V100W1NN
Unit Weight:
0.60 kg
Dimensions (L x W x D): 124 x 40 x 124 mm
General Description
Delta’s CliQ II DIN Rail Power Supply series with UL 1310 and NEC Class 2 approvals offers start-of-the-art designs made to withstand
harsh industrial environments. The rugged Aluminium case is both shock and vibration resistant according to IEC 60068-2 and adheres
to IP20 protection level. The DRP-24V100W1NN can be used in general industrial applications, especially for dry indoor condition with
the advantage of lower wiring costs for a system due to its compliance with NEC Class 2 requirements. The NEC (National Electrical
Code) is a North American standard, which is regarded as a law in most North American states. The NEC describes the installation of
electric conductors and equipments within or on buildings. Like the rest of the models in the CliQ series, conformal coating is applied
on the PCBAs to protect against dust and chemical pollutants. The Class 2 power units operates over a wide temperature range
of -25°C to +80° and universal AC input voltage range from 85Vac to 264Vac, the power will not de-rate for the entire input voltage
range value. The product also includes overvoltage, overload, over temperature and short circuit protections for the output.
Model Information
CliQ II DIN Rail Power Supply
Model Number
DRP-24V100W1NN
Input Voltage Range
85-264Vac (120-375Vdc)
Output Voltage
24Vdc
Output Current
3.80A
Model Numbering
DR
DIN Rail
P‒
Power Supply
24V
100W
Output Voltage Output Power
1
Single Phase
N
NEC Class 2
N
N - Metal Case,
without Class I, Div 2
1
All parameters are specified at 25°C ambient unless otherwise indicated.
www.DeltaPSU.com (January 2014, Rev. 00)