English
Language : 

CYRF69103_13 Datasheet, PDF (59/72 Pages) Cypress Semiconductor – Programmable Radio on Chip Low Power
CYRF69103
Absolute Maximum Ratings
Exceeding maximum ratings may shorten the useful life of the
device. User guidelines are not tested.
Storage Temperature ................................. –40 °C to +90 °C
Ambient Temperature with Power Applied ..... 0 °C to +70 °C
Supply Voltage on any power supply pin
relative to VSS ..............................................–0.3 V to +3.9 V
DC Voltage to Logic Inputs [11] ............ –0.3 V to VIO + 0.3 V
DC Voltage applied to Outputs
in High Z State ..................................... –0.3 V to VIO + 0.3 V
Static Discharge Voltage (Digital) [12] ...................... >2000 V
Static Discharge Voltage (RF) [12] .............................. 1100 V
Latch up Current .....................................+200 mA, –200 mA
Ground Voltage ................................................................ 0 V
FOSC (Crystal Frequency) .......................... 12 MHz ±30 ppm
DC Characteristics
(T = 25 C)
Parameter
Description
Conditions
Min Typ Max Unit
VBAT
VREG[13]
VLVD
Battery Voltage
PMU Output Voltage
Low Voltage Detect
0–70 C
2.7V mode
LVDCR [2:0] set to 000
LVDCR [2:0] set to 001
1.8
–
3.6
V
2.7 2.73 –
V
2.69 2.7 2.72 V
2.90 2.92 2.94 V
LVDCR [2:0] set to 010
3.00 3.02 3.04 V
LVDCR [2:0] set to 011
3.10 3.13 3.15 V
VIO
VIO Voltage
1.8
–
3.6
V
VCC
VCC Voltage
0–70 C
2.4
–
3.6
V
Device Current (For total current consumption in different modes, for example Radio, active, MCU, and sleep, add Radio Function
Current and MCU Function Current)
ICC (GFSK)[14] Average ICC, 1 Mbps, slow channel
PA = 5, 2-way, 4 bytes/10 ms CPU
speed = 6 MHz
–
9.87
–
mA
ICC (32-8DR)[14] Average ICC, 250 kbps, fast channel
PA = 5, 2-way, 4 bytes/10 ms CPU
speed = 6 MHz
–
10.2
–
mA
ISB1
Sleep Mode ICC
VCC = 3.0V, MCU sleep, PMU
disabled
–
2.72 –
µA
ISB2
Sleep Mode ICC
VCC = 3.0V, MCU sleep, PMU enabled
–
30.4 –
µA
Notes
11. It is permissible to connect voltages above VIO to inputs through a series resistor limiting input current to 1 mA. AC timing not guaranteed.
12. Human Body Model (HBM).
13. VREG depends on battery input voltage.
14. Includes current drawn while starting crystal, starting synthesizer, transmitting packet (including SOP and CRC16), changing to receive mode, and receiving ACK
handshake. Device is in sleep except during this transaction.
Document Number: 001-07611 Rev *I
Page 59 of 72