BCM89071A1CUBXGT Datasheet, PDF (52/69 Pages) Cypress Semiconductor – Single-Chip Automotive Grade Bluetooth Transceiver and Baseband Processor

BCM89071 Data Sheet
RF Specifications
Table 19: Receiver RF Specifications^{a b} (Cont.)
Parameter
Conditions
Minimum Typical ^c Maximum Unit
Spurious Emissions ^g
30 MHz to 1 GHz
1 GHz to 12.75 GHz
65 MHz to 108 MHz
746 MHz to 764 MHz
851–894 MHz
925–960 MHz
1805–1880 MHz
1930–1990 MHz
2110–2170 MHz
–
–
FM Rx
CDMA
CDMA
EDGE/GSM
EDGE/GSM
PCS
WCDMA
–
–
–57
dBm
–
–
–47
dBm
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
–
–145
–
dBm/
Hz
a. All specifications are single ended. Unused inputs are left open.
b. All specifications, except typical, are for automotive grade 3 temperatures. For details see Table 18 on
page 49.
c. Typical operating conditions are 1.22V operating voltage and 25°C ambient temperature.
d. The receiver sensitivity is measured at BER of 0.1% on the device interface.
e. Meets this specification using front-end bandpass filter.
f. f0 = -64 dBm Bluetooth-modulated signal, f1 = –39 dBm sine wave, f2 = –39 dBm Bluetooth-modulated signal,
f0 = 2f1 – f2, and |f2 – f1| = n*1 MHz, where n is 3, 4, or 5. For the typical case, n = 5.
g. Includes baseband radiated emissions.
Broadcom^®
April 16, 2015 • 89071-DS106-R
Baseband Transceiver and Baseband Processor
Page 51