CY8CLED16P01 Datasheet, PDF (47/58 Pages) Cypress Semiconductor – Powerline Communication Solution Integrated Powerline Modem PHY

CY8CLED16P01
12. Development Tool Selection
12.1 Software
12.1.1 PSoC Designer™
At the core of the PSoC development software suite is PSoC
Designer, used to generate firmware applications. PSoC
Designer is available free of charge at http://www.cypress.com.
PSoC Designer comes with a free C compiler.
12.1.2 PSoC Programmer
PSoC Programmer is a very flexible programming application. It
is used on the bench in development and is also suitable for
factory programming. PSoC Programmer works either in a
standalone configuration or operates directly from PSoC
Designer. PSoC Programmer software is compatible with both
PSoC ICE Cube In-Circuit Emulator and PSoC MiniProg. PSoC
programmer is available free of charge at
http://www.cypress.com.
12.2 Development Kits
All development kits are sold at the Cypress Online Store.
12.2.1 CY3276-Programmable HV PLC + EZ-Color™ Devel-
opment Kit
The CY3276 is used for prototyping and development on the
CY8CLED16P01 with PSoC Designer. This kit supports in-circuit
emulation. The software interface enables users to run, halt, and
single-step the processor and view the content of specific
memory locations. PSoC Designer also supports the advanced
emulation features. The hardware contains the high voltage
coupling circuit for 110 VAC to 240 VAC powerline, which is
compliant with the CENELEC/FCC standards. This board also
has an onboard switch mode power supply. The kit includes:
■ One High Voltage (110 to 230VAC) PLC Board. Cypress recom-
mends that a user purchases two CY3276 kits to set up a
two-node PLC subsystem for evaluation and development.
■ LED Daughter Card
■ CY8CLED16P01-OCD (100 TQFP)
■ Software CD
■ Supporting Literature
■ MiniProg1
12.2.2 CY3277-Programmable LV PLC + EZ-Color Development
Kit
The CY3277-PLC is used for prototyping and development on
the CY8CLED16P01 with PSoC Designer. This kit supports
in-circuit emulation. The software interface enables users to run,
halt, and single-step the processor and view the content of
specific memory locations. PSoC Designer also supports
advanced emulation features. The hardware contains the low
voltage coupling circuit for 12-24V AC/DC powerline. The kit
includes:
■ One Low Voltage (12 to 24V AC/DC) PLC Board. Cypress
recommends that a user purchases two CY3275 kits to set up
a two-node PLC subsystem for evaluation and development
■ LED Daughter Card
■ CY8CLED16P01-OCD (100 TQFP)
■ Software CD
■ Supporting Literature
■ MiniProg1
12.2.3 CY3250-PLC Pod Kits
The CY3250-PLC Pod Kits are essential for development
purposes as they provide the users a medium to emulate and
debug their designs. The pod kits are available for all the
available footprints. The details are:
■ CY3250-LED16P01NQ – One SSOP Pod
(CY8CLED16P01-OCD), Two 28-SSOP Feet, One 3250-Flex
Cable, One 28-SSOP Foot Mask
■ CY3250-LED16P01QFN – One QFN Pod
(CY8CLED16P01-OCD), Two 48-QFN Feet, One 3250-Flex
Cable
■ CY3250-LED16P01NQ-POD – Two SSOP Pods
(CY8CLED16P01-OCD)
■ CY3250-LED16P01QFN-POD – Two QFN Pods
(CY8CLED16P01-OCD)
12.2.4 CY3215-DK Basic Development Kit
The CY3215-DK is used for prototyping and development with
PSoC Designer. This kit can be used in conjunction with the PLC
kits to support in-circuit emulation. The software interface
enables users to run, halt, and single step the processor and
view the content of specific memory locations. PSoC Designer
also supports the advanced emulation features. The kit includes:
■ PSoC Designer Software CD
■ ICE-Cube In-Circuit Emulator
■ ICE Flex-Pod for CY8C29x66 Family
■ Cat-5 Adapter
■ Mini-Eval Programming Board
■ 110 ~ 240V Power Supply, Euro-Plug Adapter
■ iMAGEcraft C Compiler (Registration Required)
■ ISSP Cable
■ USB 2.0 Cable and Blue Cat-5 Cable
■ 2 CY8C29466-24PXI 28-PDIP Chip Samples
Document Number: 001-49263 Rev. *J
Page 47 of 58