MB3773 Datasheet, PDF (26/31 Pages) Fujitsu Component Limited. – Power Supply Monitor with Watch-Dog Timer

MB3773
10. Notes on Use
■ Take account of common impedance when designing the earth line on a printed wiring board.
■ Take measures against static electricity.
❐ For semiconductors, use antistatic or conductive containers.
❐ When storing or carrying a printed circuit board after chip mounting, put it in a conductive bag or container.
❐ The work table, tools and measuring instruments must be grounded.
❐ The worker must put on a grounding device containing 250 kΩ to 1 MΩ resistors in series.
■ Do not apply a negative voltage
❐ Applying a negative voltage of 0.3 V or less to an LSI may generate a parasitic transistor, resulting in
malfunction.
11. Ordering Information
Part number
MB3773PF-ooo
MB3773PF-oooE1
Package
8-pin plastic SOP
(FPT-8P-M01)
8-pin plastic SOP
(FPT-8P-M01)
Remarks
Conventional version
Lead Free version
12. RoHS Compliance Information of Lead (Pb) Free version
The LSI products of Cypress with “E1” are compliant with RoHS Directive , and has observed the standard of lead, cadmium, mercury,
Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
Document Number: 002-08513 Rev. *A
Page 26 of 31