W320-03_05 Datasheet, PDF (2/18 Pages) Cypress Semiconductor – 200-MHz Spread Spectrum Clock Synthesizer/Driver

W320-03
Pin Summary
Name
Pins
Description
REF
56
3.3V 14.318-MHz clock output
XTAL_IN
2
14.318-MHz crystal input
XTAL_OUT
3
14.318-MHz crystal input
CPU, CPU# [0:2]
44, 45, 48, 49, 51, Differential CPU clock outputs
52
3V66_0
33
3.3V 66-MHz clock output
3V66_1/VCH
35
3.3V selectable through SMBus to be 66 MHz or 48 MHz
66IN/3V66_5
24
66-MHz input to buffered 66BUFF and PCI or 66-MHz clock from internal VCO
66BUFF [2:0] /3V66 21, 22, 23
[4:2]
66-MHz buffered outputs from 66Input or 66-MHz clocks from internal VCO
PCI_F [0:2]
5, 6, 7,
33 MHz clocks divided down from 66Input or divided down from 3V66
PCI [0:6]
10, 11, 12, 13, 16, PCI clock outputs divided down from 66Input or divided down from 3V66
17, 18
USB
39
Fixed 48-MHz clock output
DOT
38
Fixed 48-MHz clock output
S2
40
Special 3.3V 3 level input for Mode selection
S1, S0
54, 55
3.3V LVTTL inputs for CPU frequency selection
IREF
42
A precision resistor is attached to this pin which is connected to the internal
current reference
MULT0
43
3.3V LVTTL input for selecting the current multiplier for the CPU outputs
PWR_DWN#
25
3.3V LVTTL input for Power_Down# (active LOW)
PCI_STOP#
34
3.3V LVTTL input for PCI_STOP# (active LOW)
CPU_STOP#
53
3.3V LVTTL input for CPU_STOP# (active LOW)
PWRGD#
28
3.3V LVTTL input is a level sensitive strobe used to determine when S[2:0] and
MULTI0 inputs are valid and OK to be sampled (Active LOW). Once PWRGD#
is sampled LOW, the status of this output will be ignored.
SDATA
29
SMBus compatible SDATA
SCLK
30
SMBus compatible Sclk
VDD_REF, VDD_PCI, 1, 8, 14, 19, 32, 46, 3.3V power supply for outputs
VDD_3V66,
50
VDD_CPU
VDD_48 MHz
37
3.3V power supply for 48 MHz
VDD_CORE
26
3.3V power supply for PLL
GND_REF, GND_PCI, 4, 9, 15, 20, 31, 36, Ground for outputs
GND_3V66,
41, 47
GND_IREF,
VDD_CPU
GND_CORE
27
Ground for PLL
Document #: 38-07248 Rev. *C
Page 2 of 18