STAR1000_11 Datasheet, PDF (17/24 Pages) Cypress Semiconductor – 1M Pixel Radiation Hard CMOS Image Sensor

STAR1000
Packaging and Geometrical Constraints
Package Drawing
The detector is packaged in an 84-pin J-leaded package. The detector is mounted into position with thermally and electrically
conductive adhesive. The bottom plate of the cavity is electrically connected to a ground pin.
The detector is positioned into the cavity such that the optical center of the detector coincides with the geometrical center of the cavity
within a tolerance of ± 50 μm in X- and Y direction. The tolerance on the parallelism of the detector is ± 50 μm in X- and Y- direction.
Note: The dimensions in Figure 8 are in inches.
Figure 8. Package Drawing
Document Number: 38-05714 Rev. *F
001-07592 *C
Page 17 of 24
[+] Feedback