BCM43455 Datasheet, PDF (105/159 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/ Radio with Integrated Bluetooth 4.1 and FM Receiver

BCM43455 Preliminary Data Sheet
Bluetooth RF Specifications
Table 28: Bluetooth Receiver RF Specifications (Cont.)
Parameter
Conditions
Minimum Typical Maximum Unit
Spurious Emissions
30 MHz–1 GHz
–
–95
–62
dBm
1–12.75 GHz
851–894 MHz
925–960 MHz
–
–70
–47
dBm
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
1805–1880 MHz
1930–1990 MHz
2110–2170 MHz
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
–
–147
–
dBm/Hz
a. Dirty TX is off.
b. The maximum value represents the actual Bluetooth specification required for Bluetooth qualification as defined
in the version 4.1 specification.
c. 3 dB receiver desense.
d. 2560 MHz performance is used.
e. 2360 MHz performance is used.
f. 2580 MHz performance is used.
g. 2555 MHz performance is used.
Table 29: Bluetooth Transmitter RF Specifications
Parameter
Conditions
Minimum Typical Maximum Unit
Note: The specifications in this table are measured at the Bluetooth chip port output, unless otherwise defined.
General
Frequency range
Basic rate (GFSK) TX power at Bluetooth
QPSK TX Power at Bluetooth
8PSK TX Power at Bluetooth
Power control step
–
Note: Output power is with TCA and TSSI enabled.
2402
–
2480
–
12
–
–
8
–
–
8
–
2
4
8
MHz
dBm
dBm
dBm
dB
GFSK In-Band Spurious Emissions
–20 dBc BW
–
–
0.93 1
MHz
EDR In-Band Spurious Emissions
1.0 MHz < |M – N| < 1.5 MHz
1.5 MHz < |M – N| < 2.5 MHz
|M – N|  2.5 MHz^a
M – N = the frequency range for –
which the spurious emission is
measured relative to the
–
transmit center frequency.
–
–38 –26
–31 –20
–43 –40
dBc
dBm
dBm
Broadcom^®
November 5, 2015 • 43455-DS109-R
BROADCOM CONFIDENTIAL
Page 104