CYBLE-212006-01 Datasheet, PDF (1/39 Pages) Cypress Semiconductor – Module size: 15.00 mm × 23.00 mm × 2.00 mm

PRELIMINARY
CYBLE-212006-01
CYBLE-202007-01
CYBLE-202013-11
EZ-BLE™ PRoC™ XR Module
General Description
The CYBLE-2X20XX-X1 is a Bluetooth^ Low Energy (BLE)
wireless module solution. The CYBLE-2X20XX-X1 is a turnkey
solution and includes onboard crystal oscillators, passive
components, and the Cypress PRoC™ BLE. Refer to the
CYBL1XX7X datasheet for additional details on the capabilities
of the PRoC BLE device used on this module.
The CYBLE-2X20XX-X1 supports a number of peripheral
functions (ADC, timers, counters, PWM) and serial
communication protocols (I²C, UART, SPI) through its
programmable architecture. The CYBLE-2X20XX-X1 includes a
royalty-free BLE stack compatible with Bluetooth 4.2 and
provides up to 19 GPIOs in a 15.0 × 23.0 × 2.0 mm package.
The CYBLE-2X20XX-X1 is offered in two fully certified versions
(CYBLE-212006-01 and CYBLE-202007-01), as well as an
uncertified version (CYBLE-202013-11). The CYBLE-212006-01
includes an integrated trace antenna. The CYBLE-202007-01
supports an external antenna via a u-FL connector. The
CYBLE-202013-11 supports an external antenna through a RF
solder pad output. The CYBLE-202013-11 does not include a RF
shield and is not Bluetooth SIG or regulatory certified.
■ TX current consumption
❐ BLE silicon: 15.6 mA (radio only, 0 dbm)
❐ RFX2401C: 27 mA (PA/LNA only, +7.5 dBm)
■ RX current consumption
❐ BLE silicon: 16.4 mA (radio only, 0 dbm)
❐ RFX2401C: 8.0 mA (PA/LNA only)
■ Cypress CYBL1XX7X silicon low power mode support
❐ Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on
❐ Hibernate: 150 nA with SRAM retention
❐ Stop: 60 nA with XRES wakeup
Functional Capabilities
■ Up to 18 capacitive sensors for buttons or sliders
■ 12-bit, 1-Msps SAR ADC with internal reference,
sample-and-hold (S/H), and channel sequencer
■ Two serial communication blocks (SCBs) supporting I²C
(master/slave), SPI (master/slave), or UART
■ Four dedicated 16-bit timer, counter, or PWM blocks
(TCPWMs)
Module Description
■ LCD drive supported on all GPIOs (common or segment)
■ Module size: 15.00 mm × 23.00 mm × 2.00 mm
■ Extended Range:
❐ Up to 400 meters bidirectional communication^[1,2]
❐ Up to 450 meters in beacon only mode^[1]
■ Bluetooth 4.2 qualified single-mode module
❐ QDID: 88957
❐ Declaration ID: D032786
■ Footprint compatible options for integrated antenna or
antenna-less design options
■ Certified to FCC, IC, MIC, KC, and CE regulations
(CYBLE-212006-01 and CYBLE-202007-01 only)
■ Castelated solder pad connections for ease-of-use
■ 256-KB flash memory, 32-KB SRAM memory
■ Up to 19 GPIOs
■ Industrial temperature range: –40 °C to +85 °C
■ 32-bit processor (0.9 DMIPS/MHz) operating up to 48 MHz
■ Watchdog timer with dedicated internal low-speed oscillator
■ Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
■ I²S master interface
■ BLE protocol stack supporting generic access profile (GAP)
Central, Peripheral, Observer, or Broadcaster roles
■ Switches between Central and Peripheral roles on-the-go
■ Standard BLE profiles and services for interoperability
■ Custom profile and service for specific use cases
Benefits
CYBLE-2X20XX-X1 is provided as a turnkey solution, including
all necessary hardware required to use BLE communication
standards.
■ Proven hardware design ready to use
■ Cost optimized for applications without space constraint
■ Reprogrammable architecture
■ Fully certified module eliminates the time needed for design,
development and certification
Power Consumption
■ Bluetooth SIG qualified with QDID and Declaration ID
■ Maximum TX output power: +7.5 dbm
■ RX Receive Sensitivity: –93 dbm
■ Received signal strength indicator (RSSI) with 1-dB resolution
■ Flexible communication protocol support
■ PSoC Creator™ provides an easy-to-use integrated design
environment (IDE) to configure, develop, program, and test a
BLE application
Notes
1. Connection range tested module-to-module in full line-of-sight environment, free of obstacles or interference sources with output power of +7.5 dBm.
2. Specified as EZ-BLE XR module to module range. Mobile phone connection range will decrease based on the PA/LNA performance of the mobile phone used.
Cypress Semiconductor Corporation • 198 Champion Court
Document Number: 002-15631 Rev.*B
• San Jose, CA 95134-1709 • 408-943-2600
Revised December 16, 2016