CMPA1D1E030D Datasheet, PDF (3/6 Pages) Cree, Inc – 30 W, 13.75 - 14.5 GHz, 40 V, GaN MMIC, Power Amplifier

Block Diagram Showing Additional Capacitors for Operation Over 13.75 to 14.5 GHz
Designator
C1,C2,C3,C4,C5,C6,C7,C8,C9,C10
C11,C12,C13,C14
Description
CAP, 51pF, +/-10%, SINGLE LAYER, 0.030”, Er 3300, 100V, Ni/
Au TERMINATION
CAP, 680pF, +/-10%, SINGLE LAYER, 0.070”, Er 3300, 100V,
Ni/Au TERMINATION
Quantity
10
4
Notes:
1 _{The input, output and decoupling capacitors should be attached as close as possible to the}
die- typical distance is 5 to 10 mils with a maximum of 15 mils.
2 _{The MMIC die and capacitors should be connected with 2 mil gold bond wires.}
Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc. Other trademarks, product and company names are the property of their respective
owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
3
CMPA1D1E030D Rev 0, Preliminary
Cree, Inc.
4600 Silicon Drive
Durham, North Carolina, USA 27703
USA Tel: [phone]
Fax: [phone]
Fax: [phone]
www.cree.com/RF