EV8680 Datasheet, PDF (4/39 Pages) CML Microcircuits – Evaluation Kit

Evaluation Kit for CMX868
EV8680
1.2 Preliminary Information
1.2.1 Laboratory Equipment
The following laboratory equipment is needed to use this evaluation kit:
1.2.1.1 8 - 14V dc Power Supply
1.2.1.2 An IBM compatible PC; 66MHz ‘486 or better, running Microsoft Windows^TM 95/NT. The PIC
programming software supplied (PICPROGB.EXE) runs most efficiently under DOS and cannot be
used with Windows NT.
1.2.2 Handling Precautions
Like most evaluation kits, this product is designed for use in laboratory environments. The following
practices will help ensure its proper operation.
1.2.2.1 Static Protection
This product uses low power CMOS circuits which can be damaged by electrostatic discharge.
Partially damaged circuits can function erroneously, leading to misleading results. Observe ESD
precautions at all times when handling this product.
1.2.2.2 Contents - Unpacking
Please ensure that you have received all of the items on the separate information sheet (EK8680) and
notify CML within 7 working days if the delivery is incomplete.
1.2.3 Approvals
This product is not approved for direct or indirect connection to any public
telecommunication system. Users are advised to observe local statutory requirements which
may apply to this product.
© 2000 Consumer Microcircuits Limited
4
UM8680/2