EV8680 Datasheet, PDF (36/39 Pages) CML Microcircuits – Evaluation Kit

Evaluation Kit for CMX868
EV8680
1.7 Performance Specification
1.7.1 Electrical Performance
1.7.1.1 Absolute Maximum Ratings
Exceeding these maximum ratings can result in damage to the Evaluation Kit.
Supply (V_IN - V_SS)
Supply (V_DD - V_SS)
Voltage on any connector pin to V_SS
Current into or out of V_IN and V_SS pins
Current into or out of any other connector pin
Storage Temperature
Operating Temperature
Min.
-0.3
-0.3
-0.3
0
-20
-10
+10
Max.
40.0
7.0
V_DD + 0.3
+1.5
+20
+70
+35
Units
V
V
V
A
mA
°C
°C
1.7.1.2 Operating Limits
Correct operation of the Evaluation Kit outside these limits is not implied. To operate the Evaluation Kit with
VDD = 5.5V the user should modify resistors R13 and R17 to prevent damage to the LEDs, D6 and D7.
Supply (V_IN - V_SS)
Supply (V_DD - V_SS)
Operating Temperature
Notes
Min.
8.0
2.7
+10
Max.
14.0
5.0
+35
Units
V
V
°C
1.7.1.3 Operating Characteristics
For the following conditions unless otherwise specified:
Evaluation Device Xtal Frequency = 11.0592MHz or 12.288MHz ±0.01% (100ppm)
VDD = 2.7V or 5.0V, Tamb = +25°C.
DC Parameters
IDD (evaluation board - idle)
Notes Min.
1
Typ.
30.0
Max.
-
Units
mA
AC Parameters
Xtal/Clock Input
'High' pulse width
'Low' pulse width
2
30
-
2
30
-
-
ns
-
ns
Notes:
1. Hook relay and CD LEDs off.
2. Timing for an external input to the evaluation device CLOCK/XTAL pin.
© 2000 Consumer Microcircuits Limited
36
UM8680/2