CS2100-CP Datasheet, PDF (18/32 Pages) Cirrus Logic – Fractional-N Clock Multiplier

CS2100-CP
set to 10), the Frequency Range Indicator would then reflect the frequency range of the audio sample rate.
An R_UD of 512 would then generate the audio oversampling clocks as shown in Table 4.
Inferred Audio Sample Rate Speed Mode (used for Audio Oversampling
FsDetect[1:0] when SysClk=12.288 MHz
audio converters)
Clock
00
< 54.8 kHz
Single Speed
512 x
01
54.8 kHz to 128 kHz
Double Speed
256 x
10
> 128 kHz
Quad Speed
128 x
Table 4. Example Audio Oversampling Clock Generation from CLK_IN
Referenced Control
Register Location
Ratio......................................“Ratio (Address 06h - 09h)” on page 28
RModSel[2:0] ........................“R-Mod Selection (RModSel[2:0])” section on page 26
AutoRMod .............................“Auto R-Modifier Enable (AutoRMod)” on page 26
5.3.4
Effective Ratio (R_EFF)
The Effective Ratio (R_EFF) is an internal calculation comprised of R_UD and the appropriate modifiers, as
previously described. R_EFF is calculated as follows:
R_EFF = R_UD • R_MOD • Auto R-Mod
To simplify operation the device handles some of the ratio calculation functions automatically (such as
when the internal timing reference clock divider is set). For this reason, the Effective Ratio does not need
to be altered to account for internal dividers.
Ratio modifiers which would produce an overflow or truncation of R_EFF should not be used; For example
if R_UD is 1024 an R_MOD of 8 would produce an R_EFF value of 8192 which exceeds the 4096 limit of the
12.20 format. In all cases, the maximum and minimum allowable values for R_EFF are dictated by the fre-
quency limits for both the input and output clocks as shown in the “AC Electrical Characteristics” on
page 7.
18
DS840PP1