English
Language : 

CAT9555_08 Datasheet, PDF (4/17 Pages) Catalyst Semiconductor – 16-bit I2C and SMBus I/O Port with Interrupt
◁
CAT9555
D.C. OPERATING CHARACTERISTICS
VCC = 2.3 to 5.5 V; VSS = 0V; TA = -40°C to +85°C, unless otherwise specified
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Supplies
VCC Supply voltage
ICC Supply current
2.3
—
5.5
V
Operating mode; VCC = 5.5 V; no load; fSCL = 100
kHz
—
135
200
µA
Istbl Standby current
Standby mode; VCC = 5.5 V; no load; VI = VSS;
fSCL = 0 kHz; I/O = inputs
—
1.1
1.5
mA
Istbh Standby current
Standby mode; VCC = 5.5 V; no load; VI = VCC;
fSCL = 0 kHz; I/O = inputs
—
0.75
1
µA
VPOR Power-on reset voltage
No load; VI = VCC or VSS
—
1.5
1.65
V
SCL, SDA, INT
VIL (1) Low level input voltage
VIH (1) High level input voltage
IOL Low level output current
IL
Leakage current
CI (2) Input capacitance
CO (2) Output capacitance
A0, A1, A2
VOL = 0.4V
VI = VCC = VSS
VI = VSS
VO = VSS
-0.5
—
0.3 VCC
V
0.7 VCC
—
5.5
V
3
—
—
mA
–1
—
+1
µA
—
—
6
pF
—
—
8
pF
VIL(1)
VIH(1)
ILI
Low level input voltage
High level input voltage
Input leakage current
-0.5
—
0.3 VCC
V
0.7 VCC
—
5.5
V
-1
—
1
µA
I/Os
VIL Low level input voltage
VIH High level input voltage
IOL Low level output current
VOH High level output voltage
IIH
IIL
CI (2)
CO (2)
Input leakage current
Input leakage current
Input capacitance
Output capacitance
VOL = 0.5 V; VCC = 2..3 V to 5.5 V (3)
VOL = 0.7 V; VCC = 2..3 V to 5.5 V (3)
IOH = – 8 mA; VCC = 2.3 V; (4)
IOH = – 10 mA; VCC = 2.3 V; (4)
IOH = – 8 mA; VCC = 3.0 V; (4)
IOH = – 10 mA; VCC = 3.0 V; (4)
IOH = – 8 mA; VCC = 4.75 V; (4)
IOH = – 10 mA; VCC = 4.75 V; (4)
VCC = 3.6 V; VI = VCC
VCC = 5.5 V; VI = VSS
-0.5
—
0.3 VCC
V
0.7 VCC
—
5.5
V
8
8 to 20
—
mA
10
10 to 24
—
mA
1.8
—
—
V
1.7
—
—
V
2.6
—
—
V
2.5
—
—
V
4.1
—
—
V
4.0
—
—
V
—
—
1
µA
—
—
-100
µA
—
—
5
pF
—
—
8
pF
Notes:
1. VIL min and VIH max are reference values only and are not tested.
2. This parameter is characterized initially and after a design or process change that affects the parameter. Not 100% tested.
3. Each I/Os must be externally limited to a maximum of 25 mA and each octal (I/O0.0 to I/O0.7 and I/O1.0 to I/O1.7) must be limited to a
maximum current of 100 mA for a device total of 200 mA.
4. The total current sourced by all I/Os must be limited to 160 mA.
Doc. No. MD-9003 , Rev. G
4
© Catalyst Semiconductor, Inc.
Characteristics subject to change without notice
 ▷