CAT25C64_06 Datasheet, PDF (13/16 Pages) Catalyst Semiconductor – 64K-Bit SPI Serial CMOS EEPROM

CAT25C64
Embossed Carrier Dimensions (12 Pape Only)
K
T
TOP
COVER
TAPE
B1
K0(2)
D
(2)
A0
B0
P0
P2
10 PITCHES
CUMULATIVE TOLERANCE
ON TAPE 0.2mm( 0.008)
E
F
W
EMBOSSMENT
FOR MACHINE REFERENCE ONLY
INCLUDING DRAFT AND RADII
CONCENTRIC ABOUT B0
P
CENTER LINES
OF CAVITY
USER DIRECTION OF FEED
D1
FOR COMPONENTS
2.0mm X 1.2mm
AND LARGER
Embossed Tape—Constant Dimensions⁽¹⁾
Tape Sizes
12mm
D
1.5 (0.059)
1.6 (0.063)
E
1.65 (0.065)
1.85 (0.073)
P₀
3.9 (0.153)
4.1 (0.161)
T Max.
400
(0.016)
D1 Min.
1.5
(0.059)
A₀
B₀
K (2)
0
Embossed Tape—Variable Dimensions⁽¹⁾
Tape Sizes
12mm
B₁ Max.
8.2
(0.0323)
F
5.45 (0.0215)
5.55 (0.0219)
K Max.
4.5
(0.177)
P₂
1.95 (0.077)
2.05 (0.081)
R Min.
30
(1.181)
W
11.7 (0.460)
12.3 (0.484)
P
7.9 (0.275)
8.1 (0.355)
Note:
(1) Metric dimensions will govern; English measurements rounded, for reference only and in parentheses.
(2) A₀ B₀ K₀ are determined by component size. The clearance between the component and the cavity must be within 0.05 (0.002) min. to
0.65 (0.026) max. for 12mm tape, 0.05 (0.002) min. to 0.90 (0.035) max. for 16mm tape, and 0.05 (0.002) min. to 1.00 (0.039) max. for
24mm tape and larger. The component cannot rotate more than 20° within the determined cavity, see Component Rotation.
© 2006 by Catalyst Semiconductor, Inc.
13
Characteristics subject to change without notice
Doc. No. 1112, Rev. B