CM2009 Datasheet, PDF (3/6 Pages) California Micro Devices Corp – VGA Port Companion Circuit

CM2009
Pin Description
LEAD(s)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NAME
V_{CC_SYNC}
V_{CC_VIDEO}
VIDEO_1
VIDEO_2
VIDEO_3
GND
V_{CC_DDC}
BYP
DDC_OUT1
DDC_IN1
DDC_IN2
DDC_OUT2
SYNC_IN1
SYNC_OUT1
SYNC_IN2
SYNC_OUT2
PIN DESCRIPTIONS
DESCRIPTION
This is an isolated supply input for the SYNC_1 and SYNC_2 level shifters and their associ-
ated ESD protection circuits.
This is a supply pin specifically for the VIDEO_1, VIDEO_2 and VIDEO_3 ESD protection cir-
cuits.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the VGA controller device and the video connector.
Ground reference supply pin.
This is an isolated supply input for the DDC_1 and DDC_2 level-shifting N-FET gates.
This input is used to connect an external 0.2uF bypass capacitor to the DDC circuits, resulting
in an increased ESD withstand voltage rating for these circuits (±8kV with vs. ±4kV without).
DDC signal output. Connects to the video connector side of one of the sync lines.
DDC signal input. Connects to the VGA controller side of one of the sync lines.
DDC signal input. Connects to the VGA controller side of one of the sync lines.
DDC signal output. Connects to the video connector side of one of the sync lines.
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
Sync signal buffer output. Connects to the video connector side of one of the sync lines.
Sync signal buffer input. Connects to the VGA controller side of one of the sync lines.
Sync signal buffer output. Connects to the video connector side of one of the sync lines.
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
V_{CC_VIDEO},V_{CC_DDC} and V_{CC_SYNC} Supply Voltage Inputs
ESD Diode Forward Current (one diode conducting at a time)
DC Voltage at Inputs
VIDEO_1, VIDEO_2, VIDEO_3
DDC_IN1, DDC_IN2
DDC_OUT1, DDC_OUT2
SYNC_IN1, SYNC_IN2
Operating Temperature Range
Storage Temperature Range
Package Power Rating (T_A=25°C)
RATING
[GND - 0.5] to +6.0
10
[GND - 0.5] to [V_{CC_VIDEO} + 0.5]
[GND - 0.5] to 6.0
[GND - 0.5] to 6.0
[GND - 0.5] to [V_{CC_SYNC} + 0.5]
-40 to +85
-40 to +150
500
UNITS
V
mA
V
V
V
V
°C
°C
mW
© 2004 California Micro Devices Corp. All rights reserved.
08/12/04 430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲ Tel: [phone] ▲ Fax: [phone] ▲ www.calmicro.com
3