CS4364 Datasheet, PDF (1/50 Pages) Cirrus Logic – 103 dB, 192 kHz 6-Channel D/A Converter

CS4364
103 dB, 192 kHz 6-Channel D/A Converter
Features
! Advanced Multi-bit Delta Sigma Architecture
! 24-bit Conversion
! Automatic Detection of Sample Rates up to
192 kHz
! 103 dB Dynamic Range
! -88 dB THD+N
! Single-Ended Output Architecture
! Direct Stream Digital Mode
– Non-Decimating Volume Control
– On-Chip 50 kHz Filter
– Matched PCM and DSD Analog Output
Levels
! Compatible with Industry-Standard Time
Division Multiplexed (TDM) Serial Interface
! Selectable Digital Filters
! Volume Control with 1/2-dB Step Size and Soft
Ramp
! Low Clock Jitter Sensitivity
! +5 V Analog Supply, +2.5 V Digital Supply
! Separate 1.8 to 5 V Logic Supplies for the
Control & Serial Ports
Description
The CS4364 is a complete 6-channel digital-to-analog
system. This D/A system includes digital de-emphasis,
half-dB step size volume control, ATAPI channel mix-
ing, selectable fast and slow digital interpolation filters
followed by an oversampled, multi-bit delta sigma mod-
ulator which includes mismatch shaping technology that
eliminates distortion due to capacitor mismatch. Follow-
ing this stage is a multi-element switched capacitor
stage and low-pass filter with single-ended analog
outputs.
The CS4364 also has a proprietary DSD processor
which allows for volume control and 50 kHz on-chip fil-
tering without an intermediate decimation stage. It also
offers an optional path for direct DSD conversion by di-
rectly using the multi-element switched capacitor array.
The CS4364 accepts PCM data at sample rates from
4 kHz to 216 kHz, DSD audio data, and delivers excel-
lent sound quality. These features are ideal for multi-
channel audio systems including SACD players, A/V re-
ceivers, digital TV’s, mixing consoles, effects
processors, sound cards and automotive audio
systems.
This product is available in 48-pin LQFP package and is
available in both Automotive (-40° C - +85° C) and
Commercial (-10° C - +70° C) temperature grades. For
full Ordering Information see page 49.
Control Port Supply = 1.8 V to 5 V
Digital Supply = 2.5 V
Analog Supply = 5 V
Hardware Mode or
I²C/SPI Software Mode
Control Data
Reset
Serial Audio Port
Supply = 1.8 V to 5 V
PCM Serial
Audio Input
TDM Serial
Audio Input
DSD Audio
Input
Register/Hardware
Configuration
Internal Voltage
Reference
Volume
6 Controls
Digital
Filters
Multi-bit ∆Σ
Modulators
Switch-Cap
DAC and
Analog Filters
Six Channels of
Single-Ended
6
Outputs
DSD Processor
-Volume control
-50 kHz filter
External Mute
Control
6
Mute Signals
Advance Product Information
http://www.cirrus.com
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Copyright © Cirrus Logic, Inc. 2005
(All Rights Reserved)
AUGUST '05
DS619A1