4608X-102-102 Datasheet, PDF (31/62 Pages) Bourns Electronic Solutions – Resistor Networks Product Selection Guide

Features
s Low noise termination for CMOS
s Combined resistors and capacitors in SIP
package saves space
s Reduced insertion time
s Insulation resistance testing for reliability
s Pin counts from 4 to 16 available
700 Series - RC Terminator Networks
Electrical Characteristics - Resistors
Standard Resistance Range .........................................................22 ohms to 500K ohms
Resistance Tolerance ±5% ............................................................50 ohms to 1 megohm
Operating Voltage .................................................................................50 volts maximum
Electrical Characteristics - Capacitors
Capacitance Range ............................................................................39 pF to 47,000 pF
Capacitance Range ...................................................................470 pF to 47,000 pF X7R
Capacitance Range............................................................................39pF to 470pF NPO
Capacitance Tolerance .............................................................................................±20%
Operating Temperature..............................................................................-30°C to +85°C
Voltage Rating........................................................................................................50 volts
Physical Characteristics
Flammability ..................................................................................Conforms to UL 94 V-0
Lead Frame Material.......................................................................Copper, solder coated
Body Material ............................................................................................Conformal coat
701
1
8
1
NO. OF LINES BOURNS P/N
7
4608H-701-RC/CC
8
4609H-701-RC/CC
9
4610H-701-RC/CC
9
PACKAGE
High Profile
Conformal
SIP
702
Typical Part Marking
PART NUMBER
PIN ONE
INDICATOR
CIRCUIT
4608H-701
RC/CC
YYWW
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
Product Dimensions
A
MAXIMUM
8.89
(.350)
MAX.
PIN #1
REF.
MAX. 1.24
BOTH ENDS (.049)
.508
(.020
±
±
.050
.002)
TYP.
2.54 ± .07
(.100 ± .003* )
TYP.
NON-ACCUM.
3.81
(.150)
MAX.
.254
(.010
±
±
.050
.002)
TYP.
3.43 + .38/ - .25
(.135 + .015/ - .010)
Pin
Count
4
5
6
7
8
9
10
11
12
13
14
15
16
A Maximum
mm (Inches)
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
38.04 (1.498)
40.59 (1.598)
Governing dimensions are metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
1
10
NO. OF LINES BOURNS P/N
8
4610H-702-RC/CC
PACKAGE
High Profile
Conformal SIP
FOR ADDITIONAL INFORMATION, SEE APPLICATION NOTE ON PAGES 322 AND 323.
Specifications are subject to change without notice.
307