4608X-102-102 Datasheet, PDF (20/62 Pages) Bourns Electronic Solutions – Resistor Networks Product Selection Guide

Features
s High profile offers increased power
handling
s Wide assortment of pin packages
enhances design flexibility
s Ammo-pak packaging available
s Recommended for rosin flux and solvent
clean or no clean flux processes
s Marking on contrasting background for
permanent identification
4600H Series - Thick Film Conformal SIPs
Product Characteristics
Resistance Range
......................10 ohms to 10 megohms
Maximum Operating Voltage...........100V
Temperature Coefficient of Resistance
50Ω to 2.2 MΩ..................±100ppm/°C
below 50Ω ........................±250ppm/°C
above 2.2 MΩ...................±250ppm/°C
TCR Tracking ..........................50ppm/°C
maximum; equal values
Resistor Tolerance ................See circuits
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Operating Temperature
...................................-55°C to +125°C
Environmental Characteristics
TESTS PER MIL-STD-202........ ∆R MAX.
Short Time Overload...................±0.25%
Load Life .....................................±1.00%
Moisture Resistance ...................±0.50%
Resistance to Soldering Heat .....±0.25%
Terminal Strength........................±0.25%
Thermal Shock............................±0.25%
Physical Characteristics
Flammability .........Conforms to UL94V-0
Body Material........................Epoxy resin
Standard Packaging
....................Bulk, Ammo-pak available
Package Power Temp. Derating Curve
3.50
3.00 _4614H
2.50 ^4612H
2.00 ^4610H
4608H
1.50
4606H
1.00 _4604H
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Ratings (Watts)
Pkg.
Ambient
Ambient
Temperature
Temperature
70°C Pkg.
70°C
4604H
4605H
4606H
4607H
4608H
4609H
0.80 4610H 2.00
1.00 4611H 2.20
1.20 4612H 2.40
1.40 4613H 2.60
1.60 4614H 2.80
1.80
How To Order
46 06 H - 101 - 222
Model
(46 = Conformal SIP)
Number of Pins
Physical Configuration
(H = Thick Film High Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo
• AP2 = Isolated Ammo
• AP4 = Dual Ammo
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Consult factory for other available options.
Typical Part Marking
Represents total content. Layout may vary.
Part Number
Part Number
4606H-101-RC
6H-1-RC
4608H-102-RC
8H-2-RC
4610H-104-RC/RC 10H-4-RC/RC
RC = ohmic value, 3-digit resistance code.
NUMBER OF PINS
PIN ONE
INDICATOR
CIRCUIT
6H-2-222
YYWW
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
Product Dimensions
A
MAXIMUM
8.89
(.350)
MAX.
PIN #1
REF.
MAX. 1.24
BOTH ENDS (.049)
.508
(.020
±
±
.050
.002)
TYP.
2.54 ± .07
(.100 ± .003*)
TYP.
NON-ACCUM.
2.49
(.098)
MAX.
.254
(.010
±
±
.050
.002)
TYP.
3.43 +.38/ -.508
(.135 +.015/ -.020)
Pin
Count
4
5
6
7
8
9
10
11
12
13
14
A Maximum
mm (Inches)
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
Maximum package length is equal to 2.54mm (.100") times the
number of pins, less .005mm (.002").
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
296
Specifications are subject to change without notice.