4608X-102-102 Datasheet, PDF (12/62 Pages) Bourns Electronic Solutions – Resistor Networks Product Selection Guide

Features
s Low profile provides compatibility with
DIPs
s Compatible with automatic insertion
equipment
s Superior package integrity
s Marking on contrasting background for
permanent identification
s Top marking standard
4300R Series - Thick Film Molded SIPs
Product Characteristics
Resistance Range
......................10 ohms to 10 megohms
Maximum Operating Voltage...........100V
Temperature Coefficient of Resistance
50Ω to 2.2 MΩ..................±100ppm/°C
below 50Ω ........................±250ppm/°C
above 2.2 MΩ...................±250ppm/°C
TCR Tracking ..........................50ppm/°C
maximum; equal values
Resistor Tolerance ................See circuits
Operating Temperature
...................................-55°C to +125°C
Power Rating ....................Derate to zero
power from + 70°C to + 125°C
Insulation Resistance
..................10,000 megohms minimum
Dielectric Withstanding Voltage
.............................................200 VRMS
Lead Solderability
.....Meet requirements of MIL-STD-202
Method 208
Environmental Characteristics
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload...................±0.25%
Load Life .....................................±1.00%
Moisture Resistance ...................±0.50%
Resistance to Soldering Heat
.................................................±0.25%
Terminal Strength........................±0.25%
Thermal Shock............................±0.25%
Physical Characteristics
Flammability .........Conforms to UL94V-0
Lead Frame Material
..........................Copper, solder coated
Body Material ..................Novolac epoxy
Package Power Temp. Derating Curve
3.50
3.00
2.50
2.00
1.50 _4311R
4310R
4309R
1.00 _4308R
4306R
.50
0
25
70
125
AMBIENT TEMPERATURE ( °C )
Package Power Rating at 70°C
4306R......................................0.75 watts
4308R......................................1.00 watts
4309R......................................1.13 watts
4310R......................................1.25 watts
4311R......................................1.38 watts
Typical Part Marking
Represents total content. Layout may vary.
PART
NUMBER
PIN ONE
INDICATOR
4306R-101-
222
YYWW
CIRCUIT
RESISTANCE
CODE
DATE CODE
MANUFACTURER'S
TRADEMARK
Product Dimensions
27.53 _MAX.
(1.084)
22.45
(.884)
MAX.
14.83 _MAX.
(.584)
24.99
(.984)
MAX.
19.92 _MAX.
(.784)
PIN #1 REF.
4.95
(.195)
MAX.
.407 + .102/ - .000
(.016 + .004/ - 000)
2.54 ± .07
(.100 ± .003*)
TYP.
NON-ACCUM.
3.43 + .38/ - .25
(.135 + .015/ - .010)
1.02 ± .12
(.040 ± .005)
.483
(.020
±
±
.050
.002)
TYP.
2.16 ± .10
(.085 ± .004)
1.02 ± .05
(.0425 ± .002)
.254 ± .050
(.010 ± .002)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
How To Order
43 06 R - 101 - 222
Model
(43 = Molded SIP)
Number of Pins
Physical Configuration
(R = Thick Film Low Profile)
Electrical Configuration
• 101 = Bussed
• 102 = Isolated
• 104 = Dual Terminator
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
Consult factory for other available options.
288
Specifications are subject to change without notice.