4608X-102-102 Datasheet, PDF (24/62 Pages) Bourns Electronic Solutions – Resistor Networks Product Selection Guide

Features
s Standard E.I.A. package compatible with
automatic placement equipment
s Compliant leads to reduce solder joint
fatiguing
s Tape and reel packaging standard
(see page 304 for dimensions)
s Marking on contrasting background for
permanent identification
s Standard electrical schematics: isolated,
bussed, dual terminator
s Custom circuits are available
4400P Series - Thick Film Surface Mounted Wide Body
Product Characteristics
Resistance Range
.....................10 ohms to 2.2 megohms
Maximum Operating Voltage.............50V
Temperature Coefficient of Resistance
50 ohms and above..........±100ppm/°C
below 50 ohms.................±250ppm/°C
TCR Tracking
...............50ppm/°C max.; equal values
Operating Temperature
...................................-55°C to +125°C
Insulation Resistance
..........................10,000 megohms min.
Dielectric Withstanding Voltage
.............................................200 VRMS
Lead Solderability
.....Meet requirements of MIL-STD-202
Method 208
Environmental Characteristics
TESTS PER MIL-STD-202.........∆R MAX.
Short Time Overload...................±0.25%
Load Life .....................................±1.00%
Moisture Resistance ...................±0.50%
Resistance to Soldering Heat .....±0.25%
Thermal Shock............................±0.25%
Physical Characteristics
Flammability .........Conforms to UL94V-0
Lead Frame Material
..........................Copper, solder coated
Body Material ..................Novolac epoxy
How To Order
44 20 P - 1 - 103
Model
(44 = SMD SOL Pkg)
Number of Pins
Electrical Configuration
• 1 or 4 = Isolated*
• 2 = Bussed*
• 3 = Dual Terminator*
Resistance Code
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
*For tube packaging, use T01, T02, T03 or T04.
Consult factory for other available options.
Package Power Temp. Derating Curve
2.25
2.00
1.75
1.50
1.25
1.00
.75
.50
.25
0
4420P
4416P
25
70
125
AMBIENT TEMPERATURE ( °C )
Product Dimensions
7.493 ± .076
(.295 ± .003)
10.34 ± .25
(.407 ± .010)
10.41 ± .05
(.410 ± .003)
.406 ± .025
(.016 ± .001)
12.95 ± .05
(.510 +.001/ -.002)
Package Power Rating at 70°C
4420P......................................2.00 watts
4416P......................................1.60 watts
REecCoOmMmMeEnNdeDdEDLaLnAdNPDatPteArTnTERN
1.27 _TYP.
(.050)
.63 _TYP.
(.025)
2.0 _TYP.
(.079)
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
11.6
(.457)
SO-16L
.63
(.025)
SO-20L
12.07
(.475)
7.6
(.299)
NOTE: Land pattern dimensions are based on
design rules established by the Institute for Inter-
connecting and Packaging Electronic Circuits in
IPC-SM-782.
1.27 ± .076
(.050 ± .003*)
TYP.
.127 + .127/ - .000
(.005 + .005/ - .000)
2.65
(.104)
MAX.
.305 + .000/ - .076
(.012 + .000/ - .003)
8° MAX.
.94 + .33/ - .35
(.037 + .013/ - .014)
Governing dimensions are in metric. Dimensions in parentheses
are inches and are approximate.
*Terminal centerline to centerline measurements made at point of
emergence of the lead from the body.
Typical Part Marking
epresents total content. Layout may vary.
PART NUMBER
RESISTANCE
CODE
4420P-1 CIRCUIT
-103
YYWW DATE CODE
PIN ONE
INDICATOR
MANUFACTURER'S
TRADEMARK
300
Specifications are subject to change without notice.