G2PW1V260 Datasheet, PDF (2/8 Pages) Bel Fuse Inc. – PISCES II DC/DC CONVERTERS

POWER PRODUCTS
G2PW1V260
PISCES II DC/DC CONVERTERS
48V Input – 1.2VDC – 60A Output
Input Specifications
Parameter
Min
Typical
Max
Units
Operating Input Voltage
Input Current
36
48
75
V_DC
6
A
Input Capacitance
4
µF
Input Hysteresis, Low Line
2
V_DC
VIN = 48V_DC, T_A@25˚ C, 300 LFM Airflow, V_OUT = 1.2V_DC, I_OUT = Full load unless otherwise noted.
Available output power depends on ambient temperature and good thermal management.
(See application graphs for limits.)
Output Specifications
Parameter
Regulation Over Line, Load & Temperature
Voltage Ripple
Voltage Ripple, 20MHz BW
Current Range
Current Limit Inception
Short Circuit Current, Peak¹
Output Transient Response, 50% to 75% Load Change, 1A/µsec
Settling Time to ± 1%
Turn-on Time to 98% Vnom
Output Overshoot at Turn-on
Trim Range
Over Voltage Protection, Latching
Min
Typical
Max
Units
98
102
%V_NOM
25
mV _RMS
85
mV _P–P
0
60
A
103
140
%I_OUT
90
A
5
%V_OUT
200
µS
35
mS
0
%V_OUT
70
110
%V_OUT
130
%V_OUT
1. During short circuit, converter will shut down and attempt to restart once per second. The average current during this
condition will be very low and the device can be safely left in this condition continuously.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 11.06
Bel Power Inc. 155 Flanders Road, Westborough, MA 01581 • Tel [phone] • Fax [phone] • www.belpower.com
page 2