G2PW1V260 Datasheet, PDF (1/8 Pages) Bel Fuse Inc. – PISCES II DC/DC CONVERTERS

PISCES II DC/DC CONVERTERS
48V Input – 1.2VDC – 60A Output
G2PW1V260 – ¹/4 Brick Pisces II Series
• Industry standard pinout and footprint
• Very low dissipation
• No heat sink required for most applications
• Low profile, 0.38"
• High efficiency: 86% at 1.2V, 60A; 88% at 1.2V, 30A
• Very low common-mode noise for a commercial DC/DC converter
• Two-stage input filter
• Constant switching frequency
• Remote sense, wide trim range
• Single board design, very low parts count
• Optional baseplate or low profile heat sink for improved thermal performance
• Header with M3 metal inserts for mechanical connection to PCB
POWER PRODUCTS
G2PW1V260
Control Functions
• Uses patented power supply control and architecture
• Microprocessor controlled
• Primary-side enable, choice of logic
Protection Features
• Over temperature protection
• Over voltage protection
• Over current protection
• Over/Under input voltage protection
Ordering Information
Typical Characteristics
• Output setpoint accuracy: ± 1%
• Load regulation: ± 0.2%
• Line regulation: ± 0.2%
• Regulation over line, load,
and temperature: ± 2%
• Low output ripple
• Output trim
Example Part Number: (All options)
G2PW1V260 PS RT 0 0 X
Standard Model Number Input Voltage Output Voltage Max Current
G2PW1V260*
48V
1.2V
60A
* Options:
P = Positive Logic Version;
High = On
E = 0.18" Pins (± .01") R = Heat Sink Ready
M = 0.145" Pins (± .01") T = Tuned model**
S = 0.12" Pins (± .01")
Pisces II Heat Sink
Part Numbers
Typical Thermal Performance
Part Number
Options:
Positive Logic Version
Optional Pin Lengths
E = 0.18"
M = 0.145"
S = 0.12"
Heat Sink Ready
Tuned Model
Heat Sink
Part
Number
Height
Natural Convection Forced Convection
Power Dissipation^† Thermal Resistance^‡
** T (Tuned Model) Option
Designed for higher di/dt and ∆l
applications, the transient response has
001
0.25"
5W
002
0.50"
7W
5.8˚ C/W
3.2˚ C/W
been modified to take advantage of the
capacitance on the customer’s PCB. This
unit requires a minimum load capacitance
003
1.00"
004
0.13"
11W
TBD
2.0˚ C/W
TBD
of 5600µF with an impedance magnitude
of less than 0.005Ω at 15kHz. It offers
a minmum 3X improvement in the peak
005
0.70"
† @ 60˚ C rise heat sink to ambient
TBD
‡ @ 300'/min.
TBD
response compared to a standard unit.
Consult factory.
©2006 Bel Fuse Inc. Specifications subject to change without notice. 11.06
Bel Power Inc. 155 Flanders Road, Westborough, MA 01581 • Tel [phone] • Fax [phone] • www.belpower.com
page 1