SLIN-06E2A_10 Datasheet, PDF (17/25 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input, 0.59 Vdc - 5.5 Vdc /6 A Outputs
December 3, 2010
Voltage Margining
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Output voltage margining can be implemented in the SLIN-06E2Ax modules by connecting a resistor, R_margin-up,
from the Trim pin to the ground pin for margining-up the output voltage and by connecting a resistor, R_margin-down,
from the Trim pin to output pin for margining-down.
Vo
Rmargin-down
MODULE
Q2
Trim
Rmargin-up
Rtrim
Q1
GND
Circuit Configuration for margining Output voltage
Monotonic Start-up and Shutdown
The SLIN-06E2Ax modules have monotonic start-up and shutdown behavior for any combination of rated input
voltage, output current and operating temperature range.
Startup into Pre-biased Output
The SLIN-06E2Ax modules can start into a prebiased output as long as the prebias voltage is 0.5V less than the
set output voltage.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
17